Camus Hydronics · Series
Camus Hydronics DynaMax Series
The DynaMax is Camus' gas-fired condensing boiler 'developed for residential and commercial applications', offered floor- or wall-mounted with up to 97% efficiency, 5:1 modulation, a stainless-steel heat exchanger and up to 100 feet of approved plastic venting.
Series facts
- Type
- condensing
- Efficiency
- 97% thermal-efficiency
- Fuel
- Natural gas or propane (NG/LP), per the captured DynaMax materials.
- Venting
- Approved plastic venting up to 100 feet with outside-air sealed direct venting (product page feature list).
- Models documented
- 0
- Warranty
- Not verified
Up to 97% efficiency, as printed on the DynaMax product page.
About the DynaMax Series
Camus describes the DynaMax as a gas-fired condensing boiler with up to 97% efficiency, developed for residential and commercial applications and available in floor or wall mount. The product page lists fully modulating 5:1 turndown, up to 150 PSI relief valves and approved plastic venting up to 100 feet with outside-air sealed direct venting.
The DynaMax family (including the DynaMax-HS variant, listed on the older catalogue copy) spans model groups DM20X & 25X, DM21X & 26X, DM29X, 39X & 50X and DM60X, 70X & 80X per Camus' Revit naming, with the product page printing 194 MBTUH and 243 MBTUH maximum outputs for the 020X and 025X groups. The older page copy labels the same equipment 'DynaMax HS'.
Camus' current installation documentation for the DynaMax is sign-in gated on SharePoint infrastructure; the legacy public installation manual was 99-0212 Rev. 02. Boilers.ca keeps this series at hub level.
Highlights
- Gas-fired condensing boiler, floor or wall mount
- Residential and commercial applications
- Up to 97% efficiency; fully modulating 5:1 turndown
- Up to 150 PSI relief valves
- Approved plastic venting up to 100 ft, outside-air sealed direct
- Model groups DM20X–80X per Camus Revit naming
Models
DynaMax Series models
One canonical page per model with input, output and efficiency kept separate.
Error codes and alerts
DynaMax Series alerts
No alerts documented for this series yet.
Manuals
Official documents
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Services for Camus Hydronics boilers
Frequently asked questions
Is the DynaMax a residential or commercial boiler?
Camus states the DynaMax was 'developed for residential and commercial applications' and is available floor- or wall-mounted. Sizing for a specific building is a heat-loss calculation, not a floor-area guess.
What venting does the DynaMax use?
The product page lists approved plastic venting up to 100 feet with outside-air sealed direct venting. Venting must follow the current installation manual and local code requirements.
Talk to a boiler technician
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Camus — DynaMax Series product page · accessed September 9, 2026
- Camus — Watertube Boilers catalogue · accessed September 9, 2026
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.