Skip to content
Boilers.caby ROMA Heating & Cooling

Brand hub

Bryan Boilers boilers in Canada

Bryan Boilers (Bryan Steam LLC) is an American commercial and industrial boiler manufacturer in Peru, Indiana — described on its own site as the originator of the flexible steel water tube boiler — with condensing lines (BFIT, BFITW, Free Flex), the legacy Triple-Flex, and forced-draft AB, RV, CLM, DR, RW and EB boilers.

Canadian status unknownHQ: Peru, Indiana

At a glance

Official site
Global site
Country
United States
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Documented series
7
Documented models
10

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

About Bryan Boilers

Bryan's Products page states: 'No company sells more flexible steel water tube boilers than Bryan Boilers. Bryan Boilers was the originator of this type of boiler and has been instrumental in its continuing development.' The company's boiler submittals and literature carry the line 'Boiler Technology Leadership Since 1916', and its address is 783 N. Chili Avenue, Peru, Indiana 46970.

The current condensing catalogue documents the BFIT Series (400–4,000 MBH inputs, 'all models are 97% Thermal Efficient', models 400–2,000 fitting through standard doorways) and the Free Flex (FF) Series (1,000–3,000 MBH input, AHRI certified at 95% thermal efficiency, stainless flexible watertube heat exchanger, fully field repairable), plus the BFITW Series of commercial condensing water heaters (400–4,000 MBH). The literature library also lists the TF Series (Triple-Flex) condensing boilers as Part 1 of the condensing literature.

The forced-draft catalogue covers the AB Series (900–3,000 MBH input, 21–75 BHP output, four-pass, 83.5% guaranteed efficiency), RV Series (3,500–8,000 MBH input, 84–201 BHP), CLM Series (marked Discontinued on its page; 1,200–3,000 MBH input), DR Series (guaranteed performance to 85%), RW Series (8,500–21,000 MBH input, 200–527 BHP) and EB Series (3,200–10,000 MBH input, 75–240 BHP). Bryan also publishes electric (BE/BH), low-NOx (LX), Knockdown and indirect water/pool heater lines, and a 25 Year Thermal Shock Warranty appears across the product pages.

The BFIT, BFITW and Free Flex submittal data sheets used for the model records on Boilers.ca are official PDFs linked from the product pages (dated 2025–2026 revisions). No official Canadian-sales statement was found on the captured pages, so canadianStatus is recorded as unknown.

Series

Bryan Boilers boiler series

Each series hub lists its models, verified specifications, manuals and documented alerts.

  • BFIT

    current

    The Bryan BFIT is the company's commercial condensing stainless-steel boiler line — 'unprecedented output in minimal space' with inputs from 400 to 4,000 MBH, all models 97% thermal efficient, and 400–2,000 MBH models sized to fit through standard doorways.

    condensingNatural gasPropane97% thermal-efficiency

    6 models, specs and manuals →

  • The Bryan BFITW Series is the commercial condensing water-heater version of the BFIT platform — 400 to 1,500 MBH and 2,000 to 4,000 MBH groups with gas or dual-fuel options, documented by Bryan as commercial condensing water heaters rather than boilers.

    dhw-onlyNatural gasPropane

    0 models, specs and manuals →

  • The Bryan Free Flex (FF) Series is the company's stainless-steel flexible-watertube condensing boiler — 'Introducing Bryan Boilers' newest Ultra High Efficiency condensing boiler' — with 1,000 to 3,000 MBH input, AHRI certified 95% thermal efficiency and full field repairability.

    condensingNatural gas95% thermal-efficiency

    4 models, specs and manuals →

  • The Triple-Flex (TF) Series is Bryan's legacy flexible-watertube condensing boiler line — still listed as 'TF Series Condensing Boilers' under Part 1 of Bryan's official boiler literature library, with the current condensing product pages now presenting the BFIT and Free Flex lines.

    condensingNatural gas

    0 models, specs and manuals →

  • AB Series

    current

    The Bryan AB Series is a forced-draft, four-pass flexible watertube boiler for gas, oil or dual-fuel firing — 900 to 3,000 MBH input (21 to 75 BHP output) at 83.5% guaranteed efficiency — available in hot water and steam configurations.

    non-condensingNatural gasPropane83.5% combustion-efficiency

    0 models, specs and manuals →

  • RV Series

    current

    The Bryan RV Series is a forced-draft, multi-pass flexible watertube boiler for gas, oil or dual-fuel firing — 3,500 to 8,000 MBH input (84 to 201 BHP output) — with hot water and steam configurations and a documented low-NOx option.

    non-condensingNatural gasPropane

    0 models, specs and manuals →

  • CLM Series

    discontinued

    The Bryan CLM Series is a discontinued forced-draft flexible watertube boiler for hot water and steam service — gas, oil or dual-fuel fired, with sizes from 1,200 MBH input (29 BHP output) to 3,000 MBH input (73 BHP output).

    non-condensingNatural gasPropane

    0 models, specs and manuals →

Models

Bryan Boilers models with verified specifications

Bryan Boilers

Bryan BFIT 400

CurrentCanadian status unknown
Input
40000–399000 BTU/HR
Output (max)
387,000 BTU/HR
AFUE
—

The Bryan BFIT 400 is a commercial condensing stainless-steel boiler rated 399,000 BTU/hr input and 387,000 BTU/hr output at 97% thermal/combustion efficiency, 12 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.

Natural gasPropaneHeating-only

Bryan Boilers

Bryan BFIT 650

CurrentCanadian status unknown
Input
65000–650000 BTU/HR
Output (max)
631,000 BTU/HR
AFUE
—

The Bryan BFIT 650 is a commercial condensing stainless-steel boiler rated 650,000 BTU/hr input and 631,000 BTU/hr output at 97% thermal/combustion efficiency, 19 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.

Natural gasPropaneHeating-only

Bryan Boilers

Bryan BFIT 1000

CurrentCanadian status unknown
Input
100000–999000 BTU/HR
Output (max)
969,000 BTU/HR
AFUE
—

The Bryan BFIT 1000 is a commercial condensing stainless-steel boiler rated 999,000 BTU/hr input and 969,000 BTU/hr output at 97% thermal/combustion efficiency, 29 BHP, with 10:1 turndown and <10 ppm NOx in Bryan's published submittal.

Natural gasPropaneHeating-only

Bryan Boilers

Bryan BFIT 1500

CurrentCanadian status unknown
Input
150000–1500000 BTU/HR
Output (max)
1,440,000 BTU/HR
AFUE
—

The Bryan BFIT 1500 is a commercial condensing stainless-steel boiler rated 1,500,000 BTU/hr input and 1,440,000 BTU/hr output at 96% thermal/combustion efficiency, 43 BHP, with 10:1 turndown and <20 ppm NOx in Bryan's published submittal.

Natural gasHeating-only

Bryan Boilers

Bryan BFIT 2000

CurrentCanadian status unknown
Input
399000–1999000 BTU/HR
Output (max)
1,939,000 BTU/HR
AFUE
—

The Bryan BFIT 2000 is a commercial condensing stainless-steel boiler rated 1,999,000 BTU/hr input and 1,939,000 BTU/hr output at 97% thermal/combustion efficiency, 58 BHP, with 5:1 turndown and <10 ppm NOx in Bryan's published submittal.

Natural gasPropaneHeating-only

Bryan Boilers

Bryan BFIT 3000

CurrentCanadian status unknown
Input
600000–3000000 BTU/HR
Output (max)
2,910,000 BTU/HR
AFUE
—

The Bryan BFIT 3000 is a commercial condensing stainless-steel boiler rated 3,000,000 BTU/hr input and 2,910,000 BTU/hr output at 97% thermal/combustion efficiency, 87 BHP, with 5:1 turndown and <10 ppm NOx in Bryan's published submittal.

Natural gasPropaneHeating-only
CurrentCanadian status unknown
Input
200000–999000 BTU/HR
Output (max)
949,000 BTU/HR
AFUE
—

The Bryan Free Flex 1000 is a stainless-steel flexible-watertube condensing boiler rated 999,000 BTU/hr input and 949,000 BTU/hr output at 95% thermal / 94% combustion efficiency, 28 BHP, with 5:1 turndown in Bryan's published submittal.

Natural gasHeating-only
CurrentCanadian status unknown
Input
300000–1500000 BTU/HR
Output (max)
1,425,000 BTU/HR
AFUE
—

The Bryan Free Flex 1500 is a stainless-steel flexible-watertube condensing boiler rated 1,500,000 BTU/hr input and 1,425,000 BTU/hr output at 95% thermal / 94% combustion efficiency, 43 BHP, with 5:1 turndown in Bryan's published submittal.

Natural gasHeating-only
CurrentCanadian status unknown
Input
400000–1999000 BTU/HR
Output (max)
1,899,000 BTU/HR
AFUE
—

The Bryan Free Flex 2000 is a stainless-steel flexible-watertube condensing boiler rated 1,999,000 BTU/hr input and 1,899,000 BTU/hr output at 95% thermal / 94% combustion efficiency, 57 BHP, with 5:1 turndown in Bryan's published submittal.

Natural gasHeating-only
CurrentCanadian status unknown
Input
600000–3000000 BTU/HR
Output (max)
2,820,000 BTU/HR
AFUE
—

The Bryan Free Flex 3000 is a stainless-steel flexible-watertube condensing boiler rated 3,000,000 BTU/hr input and 2,820,000 BTU/hr output at 95% thermal / 94% combustion efficiency, 84 BHP, with 5:1 turndown in Bryan's published submittal.

Natural gasHeating-only

Services

ROMA services for Bryan Boilers boilers

On-site service in Greater Vancouver. Brand and model context is kept when you request service.

Error codes and alerts

Bryan Boilers error codes

Documented meanings resolved against the specific series, controller and manual version. A code is not a diagnosis.

No codes documented yet.

Full Bryan Boilers error-code index →

Frequently asked questions

Is Bryan Boilers the originator of the flexible water tube boiler?

Bryan's Products page states: 'Bryan Boilers was the originator of this type of boiler and has been instrumental in its continuing development.'

Where is Bryan Boilers located?

Bryan Steam LLC is located at 783 N. Chili Avenue, Peru, Indiana 46970, as printed on its site and submittals.

Which Bryan condensing lines does Boilers.ca document?

The BFIT Series (400–4,000 MBH, 97% thermal efficiency), the Free Flex FF Series (1,000–3,000 MBH, 95% thermal efficiency) and the BFITW commercial condensing water-heater series, with the legacy Triple-Flex (TF) listed in Bryan's literature library.

Need help with a Bryan Boilers boiler?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate