Skip to content
Boilers.caby ROMA Heating & Cooling

FAQ

Gas boiler questions, answered

44 questions curated from the answers already published across Boilers.ca — services, guides, problem pages and city pages — plus the site-level questions about who runs the catalogue and how the data is checked.

Topics

Every answer links to the page it came from so you can read the full context. For how sources and dates are handled, see how Boilers.ca verifies data.

Using Boilers.ca

Who runs the site, how the catalogue is built, and how service gets booked.

Who runs Boilers.ca?

Boilers.ca is the gas-boiler information site of ROMA Heating & Cooling, a Technical Safety BC licensed gas contractor based in Burnaby, BC. The catalogue applies Canada-wide; the on-site work is done by ROMA across Greater Vancouver. Boilers.ca is not a separate company and does not perform work itself.

About Boilers.ca · How data is verified

How does Boilers.ca verify its data?

Every technical value comes from an official manufacturer or regulator document with the date it was checked, and error codes are tied to the exact controller and manual version they were read from. Values that cannot be sourced stay unknown rather than being inferred. The full policy is published on the methodology page.

How Boilers.ca verifies data · Error code database

Is the catalogue free to use?

Yes. Brands, series, models, manuals, error codes, parts and guides are free to browse with no account. The service side — installation, replacement, repair and maintenance — is separate, paid work provided by ROMA Heating & Cooling.

How Boilers.ca verifies data · All services

How do I book service?

Call 778-909-5731 or send a request through the contact form; requests are confirmed by ROMA, so the form is a request rather than a fixed booking. For a ballpark budget before sharing contact details, the instant estimator returns a CAD range.

Contact · Instant estimate

Can I buy a boiler from Boilers.ca directly?

Purchasing is handled as a supply-and-install project through consultation. Direct retail sales are not offered on this site.

Boiler consultation · Supply and install

Does ROMA provide on-site service outside Greater Vancouver?

Catalogue information applies anywhere in Canada, but on-site work is limited to the communities ROMA lists on its own service-area pages in Greater Vancouver. Outside those communities the site can still help identify equipment, manuals and documented codes.

Service areas

Repair and diagnosis

What to do when the boiler stops, locks out or behaves intermittently.

Should I keep resetting my boiler?

No. Repeated resets can hide a fault and, on some controls, extend a lockout. Note the error text, reset once if the manual allows it, and call if it returns.

Boiler repair · What error codes mean

Is repair worth it on an old boiler?

Often yes for a single, well-defined fault on a boiler under about 15 years old. Repeated faults, a failing heat exchanger or unavailable parts usually tip the decision toward replacement.

Boiler repair · Repair or replace

My boiler's error code points to a sensor. Why not just replace it?

Codes identify suspects, not verdicts. A sensor fault is often the symptom of a real cause such as a gas-pressure or flow problem, which is why the diagnostic visit tests the system rather than ordering parts from the code alone.

Boiler diagnostics

Do you investigate intermittent faults that only happen sometimes?

Yes. Control history, logged data and repeated firing-cycle testing are used where the boiler records them, and the limits of what can be confirmed are stated honestly.

Boiler diagnostics

My boiler failed and it should be under warranty. Can you handle the claim?

ROMA can review the documentation, perform and record the diagnostic evidence and coordinate with the manufacturer's process. The warranty decision is made by the manufacturer, and you will be told exactly what was submitted and what was approved.

Warranty support

What paperwork should I keep for a boiler warranty?

Typically the proof of purchase and installation date, registration confirmation and dated records of annual servicing. The documentation review will tell you what applies to your brand and what is missing.

Warranty support

Installation, replacement and sizing

How a boiler is chosen, permitted and installed — and what changes a replacement.

How is a boiler sized?

By calculating the building's heat loss room by room and adding any indirect-tank demand. Floor area alone is not a sizing method, and oversizing causes short cycling.

Boiler sizing · Sizing and heat loss guide

Is it safer to oversize a boiler just in case?

No. Oversizing causes short cycling at minimum fire, extra starts and wear, and less time spent condensing, because an oversized burner cannot match mild-weather loads. A correctly sized boiler with a modest margin is the safe engineering choice.

Sizing and heat loss guide

Do I need a permit to install a boiler in BC?

Yes. Gas appliance installation and replacement requires a gas permit, and municipalities such as Burnaby also require a heating-system permit. ROMA obtains them as part of the installation.

Boiler permits in BC

Can I pull my own gas permit to replace my boiler?

Technical Safety BC's homeowner gas permits are available to owners of single-family homes in the cases Technical Safety BC describes. If your property qualifies and you are doing the work yourself, the route exists; strata and rental properties use a licensed contractor.

Boiler permits in BC

When should I replace rather than repair?

Repeated failures, a leaking heat exchanger, unavailable parts, or a boiler over roughly 20 years old usually favour replacement. A single clear fault on a younger boiler favours repair.

Boiler replacement · Repair or replace

Can a new boiler use my old chimney?

Condensing boilers cannot vent into an unlined masonry chimney. They need dedicated sealed venting, which is one of the main scope items in a replacement.

Boiler venting explained · Boiler replacement

How long does an installation take?

A like-for-like wall-hung replacement is often a single day; new venting, gas-line upgrades, indirect tanks or hydronic changes add time. The proposal states the expected duration.

Boiler installation

Do I need a heat-loss assessment to replace my boiler?

Properly sized replacements start from a load calculation. A like-for-like swap of a boiler that was correctly sized may not need one, but the assessment is the way to catch a system that has always been undersized or oversized.

Heat-loss assessment · Sizing and heat loss guide

How much does a new boiler cost in BC?

It depends on size, type, venting, gas supply and hot-water strategy. Use the instant estimator for a ballpark range, then get a quote after an assessment.

Instant estimate · Replacement cost in BC

Will a new boiler lower my gas bill?

A condensing boiler that actually condenses usually uses less gas than an atmospheric boiler, but the saving depends on your system and habits. Boilers.ca does not publish savings claims.

Boiler replacement · Condensing boiler buying guide

Hot water: combi, tank and tankless

How the boiler and the household's hot-water demand fit together.

What is the difference between a system boiler and a combi boiler?

A combi makes hot water on demand with no tank and is limited by instantaneous flow. A heating-only boiler with an indirect tank stores hot water, so it can serve large simultaneous draws, but it needs floor space for the tank and reheats it between uses.

Combi boilers · Combi vs system boiler

Does a combi boiler ever run out of hot water?

It has no tank to empty, so it delivers continuously while the tap is open, but only up to its flow limit. Exceed that limit with simultaneous draws and the water at the fixtures cools; in winter, colder incoming water makes the limit lower.

Combi boilers · Combi vs system boiler

Does using hot water interrupt the heating?

During a hot-water draw the burner is normally set to satisfy the domestic load, so space heating is paused or reduced until the draw ends. Rooms can cool slightly during long draws, which matters more in a poorly insulated home in cold weather.

Combi boilers

Can I keep my existing hot-water tank when I replace the boiler?

Often yes if the tank is in good condition, is an indirect or compatible storage design, and the new boiler's controls can manage it. The contractor should inspect the tank and its piping before promising, since a failing tank defeats the point of a new boiler.

System boilers

Can an indirect tank be added to an existing boiler later?

Often yes, if the boiler is a heating-only unit whose controls support a tank call and the piping and circulator are added correctly. Whether your particular boiler can drive an indirect tank is confirmed from its manual and a site assessment.

Indirect tank vs tankless

Maintenance and longevity

The service that keeps a boiler safe, efficient and inside its warranty.

How often should a gas boiler be serviced?

Annually, ideally before the heating season. Most manufacturers require annual servicing to keep the warranty valid.

Boiler maintenance · Annual boiler servicing

Is an annual service actually required?

Most manufacturers condition the warranty on documented annual servicing. Beyond the warranty, the annual visit is where small problems are found before they become no-heat failures.

Annual boiler servicing · Maintenance checklist

What can I check on the boiler myself before winter?

The cold system pressure against the installer's range, visible drips and rust, clear exterior vent terminals, and working CO alarms. Combustion readings, venting inspection and anything inside the boiler are technician work.

Heating season checklist

My boiler ran fine all last winter. Do I still need the pre-season service?

Yes. Technical Safety BC recommends annual servicing of gas appliances, and combustion performance and the condensate path degrade gradually. The annual measurement is how a decline is caught while it is still an adjustment.

Heating season checklist

My boiler makes banging or rumbling noises. Is that water chemistry?

Kettling is often the sound of sludge insulating the heat exchanger while water flashes to steam against hot metal. Treatment and cleaning address that cause, and the diagnosis is confirmed before work begins.

Kettling and rumbling noises · Hydronic water treatment

How many years does a boiler typically last?

There is no published retirement age. A serviced condensing boiler commonly runs well past its warranty period, while an unserviced unit can fail young. Condition, service history and water quality are better predictors than the calendar.

Boiler lifespan and maintenance

Do you offer maintenance plans?

Maintenance plans are planned for Boilers.ca but not yet published. Call to ask what ROMA currently offers.

Maintenance plans

Safety

Gas smell, carbon monoxide and leaks. Safety first, before any service call.

What should I do if I smell gas?

Stop what you are doing, do not use switches or phones inside, go outside and leave the door open, then call the FortisBC emergency line at 1-800-663-9911 or 911. Only afterwards call ROMA about the boiler.

Gas odour near the boiler · Emergency shut-off guide

What do I do when the CO alarm sounds?

Leave the building immediately with everyone, call 911 from outside, and do not re-enter until responders say it is safe. Do not investigate, ventilate and wait; the leave-and-call sequence is the response.

Carbon monoxide alarm sounding · CO alarms in BC

Does every home with a gas boiler need a CO alarm?

The guidance on this site, from FortisBC's CO safety pages and Technical Safety BC's carbon-monoxide safety page, is that homes with gas appliances should have working CO alarms, placed where they will be heard, especially where people sleep.

CO alarms in BC

Should I turn off the gas if I smell it?

No. If you smell gas, leave the building immediately and call the gas utility's emergency line or 911 from outside before doing anything else. Gas valve operation and restoring gas service are licensed work, not homeowner tasks.

Emergency shut-off guide

How do I stop a boiler leak fast?

If the boiler or piping is leaking and flooding, shut off the water at the house main valve, and stop the boiler at its service switch. Then call for service; the relief discharge dripping water is a sign to call rather than a leak to cap.

Boiler leaking water · Emergency shut-off guide

Do you offer 24/7 emergency service?

Boilers.ca does not advertise 24/7 availability. Call 778-909-5731 and you will be told honestly when a technician can attend.

Emergency boiler repair

Costs and quotes

What the estimator is, what a quote covers, and why prices are quoted rather than listed.

Is the estimator a quote?

No. The instant estimator on this site gives a ballpark range from the details you enter. A written quote follows an on-site assessment of your home and its mechanical room.

Instant estimate · Boiler replacement cost in BC

Why do two quotes for the same boiler differ?

Quotes differ when the scope differs: venting and condensate routing, gas-line work, controls, removal of the old unit, access, and permit handling are all part of the project. Compare written scopes line by line, not boiler prices alone.

Boiler replacement cost in BC

Do you charge for a consultation?

Boilers.ca does not publish consultation fees; ask when you call. The consultation service on this site covers boiler type, sizing and scope decisions before any equipment is proposed.

Boiler consultation

Why don't you publish service prices?

Boilers.ca does not publish service fees because the visit depends on boiler type, access and condition. Ask when you call what a visit for your unit includes and what it costs.

Annual service cost · Contact

Question not answered here?

Call 778-909-5731 or send a service request — you will get a straight answer about your boiler, and ROMA does the work across Greater Vancouver.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

CallEmailEstimate