Hurst Boiler & Welding Co., Inc. · Scotch Marine Series 200
Hurst Series 200 — 800 HP
The Hurst Series 200 800 HP is a two-pass dryback Scotch Marine firetube boiler rated 27,600 lb/hr steam output and 26,780 MBH gross output on 4,000 sq ft of heating surface in Hurst's published capacity table.
Key figures
- Max input
- —
- Max CSA output
- —
- AFUE
- —
- Min input
- —
Input is gas energy consumed; output is heat delivered. Never size from input alone.
Hurst Series 200 — 800 HP in practice
Hurst's Series 200 capacity brochure prints the 800 HP row at 4,000 sq ft of fireside heating surface (5 sq ft per HP), 27,600 lb/hr steam output from and at 212°F, and 26,780 MBH gross output.
The firing-rate rows list 33,600 CFH of natural gas, 367 GPH of LP gas, 240 GPH of No. 2 oil and 224 GPH of No. 5/#6 oil. Water capacity is 3,941 gallons in the steam series (NWL) and 5,461 gallons in the water series (flooded), with dry shipping weights of 58,000 lb high pressure and 58,000 lb low pressure.
The Series 200 is a two-pass scotch-type boiler built and stamped to ASME Code and listed by the National Board, with a large combustion chamber, a front-mounted smoke box, hinged and davited rear doors (40 HP and larger) and 3" × 4" handholes with a 12" × 16" manhole from 80 HP up. Hurst documents steam design pressures to 300 psig for the series. No official Canadian-sales statement was found.
Best suited to
- Steam or hot water plants documenting an installed Series 200 800 HP against Hurst's capacity table
- Loads in the 27,600 lb/hr steam class
- Facilities that need gas, LP or oil firing flexibility in one pressure vessel
Applicability and support
- Model number
- Series 200 / 800 HP
- Canadian availability
- unknown
- Production status
- current
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Not verified
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by Hurst Boiler & Welding Co., Inc.. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| Firing rate, gas | 33,600 CFH | Natural gas at 1,000 BTU per cubic foot, as printed in the Series 200 brochure. |
| Firing rate, LP gas | 367 GPH | LP gas at 91,500 BTU per gallon, as printed in the Series 200 brochure. |
| Firing rate, No. 2 oil | 240 GPH | No. 2 oil at 140,000 BTU per gallon, as printed in the Series 200 brochure. |
| Firing rate, No. 5 & No. 6 oil | 224 GPH | No. 5 & No. 6 oil at 150,000 BTU per gallon, as printed in the Series 200 brochure. |
| Output | ||
| Steam output (from & at 212°F) | 27,600 LBS/HR | As printed in the Series 200 capacity brochure. |
| Gross output | 26,780 MBH | As printed in the Series 200 capacity brochure. |
| Physical and connections | ||
| Heating surface (fireside) | 4,000 SQ. FT. | As printed in the Series 200 capacity brochure; 5 sq ft per boiler horsepower. |
| Water capacity, steam series (NWL) | 3,941 gal | As printed in the Series 200 capacity brochure. |
| Water capacity, water series (flooded) | 5,461 gal | As printed in the Series 200 capacity brochure. |
| Shipping weight, high pressure (dry) | 58,000 lb | As printed in the Series 200 capacity brochure. |
| Shipping weight, low pressure (dry) | 58,000 lb | As printed in the Series 200 capacity brochure. |
| Operating limits and other | ||
| Boiler horsepower | 800 HP | As printed in the Hurst Series 200 capacity brochure table. |
| Steam design pressure | 15–300 psi | The Series 200 page prints pressures to 300 psig; the brochure notes 250 psi max. for the 700–1500 hp class and 200 psi max. for the 1800–2000 hp class. |
Manuals
Alerts documented for this model
None documented yet.
Frequently asked questions
What are the Hurst Series 200 800 HP ratings?
The capacity brochure prints 27,600 lb/hr steam output, 26,780 MBH gross output and 4,000 sq ft of heating surface.
What firing rates does the 800 HP row list?
33,600 CFH natural gas, 367 GPH LP gas, 240 GPH No. 2 oil and 224 GPH No. 5/#6 oil.
What kind of boiler is the Hurst Series 200?
A two-pass dryback Scotch Marine firetube boiler, available in steam or hot water versions from 15 to 800 HP.
Questions about the Hurst Series 200 — 800 HP?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Hurst — Series 200 capacity brochure (PDF) · accessed September 9, 2026
- Hurst — Series 200 product page · accessed September 9, 2026
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.