Skip to content
Boilers.caby ROMA Heating & Cooling

Victory Energy · Series

Victory Energy VOYAGER O-Type Watertube

The Victory Energy VOYAGER O-Type is an industrial watertube boiler designed for rapid ramp rates — steam capacities from 10,000 to 500,000 PPH, design pressures from 250 to 2,000 PSIG and saturated or superheated steam up to 1,050°F.

Current seriesunknownNatural gasPropanecommercial

Series facts

Type
non-condensing
Efficiency
Unknown
Fuel
Victory Energy documents gas and other industrial fuel firing; confirm the fuel list for a specific configuration with the factory.
Venting
Unknown
Models documented
0
Warranty
Not verified

About the VOYAGER O-Type Watertube

Victory Energy's O-Type page states: 'The Victory Energy VOYAGER O-type industrial watertube boiler is designed to provide a rapid ramp rate and is easy to ship, install, operate and maintain. These versatile, robust boilers have become very popular for applications that are extremely demanding in harsh environments.'

The printed capacity block reads: 'Up to 500,000+ PPH / Pressures range up to 2,000 PSIG / Temperatures up to 1,050˚F / Saturated or superheated steam / Ideal for restrictive floor plans.' The page text adds: 'Steam capacities rage [sic] from 10,000 PPH up to 500,000 PPH, design pressures from 250 PSIG to 2,000 PSIG with saturated and superheat temperatures up to 1,050 degrees F.'

The page documents a symmetrical configuration suited to restrictive floor plans, a gas outlet allowing vertical heat-recovery additions, and multiple configurations with a printed model table (VS-1 at 25,000 PPH, VS-2 at 37,000 PPH, with dimensions). Superheated versions are designed to minimize steam-temperature fluctuations across the operating range. No official Canadian-sales statement was found.

Highlights

  • Industrial O-type watertube boiler with rapid ramp rate
  • Steam capacities 10,000 – 500,000 PPH; pressures to 2,000 PSIG
  • Saturated or superheated steam up to 1,050°F
  • Symmetrical configuration for restrictive floor plans
  • Vertical heat-recovery option via the gas outlet
  • Published model table (VS-1, VS-2, …) with capacities and dimensions

Models

VOYAGER O-Type Watertube models

One canonical page per model with input, output and efficiency kept separate.

Error codes and alerts

VOYAGER O-Type Watertube alerts

No alerts documented for this series yet.

Manuals

Official documents

    Where ROMA provides on-site service

    On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

    See all service areas

    Frequently asked questions

    What are the VOYAGER O-type capacities?

    Victory prints steam capacities from 10,000 to 500,000 PPH, design pressures from 250 to 2,000 PSIG and temperatures up to 1,050°F.

    Why choose an O-type over a D-type?

    Victory describes the O-type as providing a rapid ramp rate with a symmetrical layout for restrictive floor plans; the D-type is presented for high-pressure superheated steam with restrictive heights.

    Talk to a boiler technician

    Describe what the boiler is doing and get a straight answer about the next step.

    On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

    Sources and verification

    Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

    CallEmailEstimate