Viessmann · Series
Viessmann Vitodens 200-W Cascade Systems
The Vitodens 200-W Cascade System is Viessmann Canada's prefabricated multiple-boiler commercial package: as many as eight wall-hung Vitodens 200-W condensing boilers on a manifold with an integrated low-loss header, rated input 32 to 4240 MBH, under a Vitotronic 300-K, MW2C cascade control.
Series facts
- Type
- condensing
- Efficiency
- Unknown
- Fuel
- Natural gas (NG) or liquid propane gas (LPG), as printed in the page's technical data section.
- Venting
- Common venting of up to four boilers, in accordance with local codes and regulations of authorities having jurisdiction, per the product page.
- Models documented
- 0
- Warranty
- Not verified
About the Vitodens 200-W Cascade Systems
The Vitodens 200-W Cascade System is a prefabricated multiple-boiler system built from Vitodens 200-W gas-fired condensing boilers, a prefabricated distribution manifold and an integrated low-loss header that acts as a hydraulic break and helps eliminate air and debris. The page headline is 'Rated input: 32 to 4240 MBH', and it is positioned as ideal for small boiler rooms, with all serviceable components accessible from the front and no pipe or manifold sizing required.
As many as eight Vitodens 200-W boilers can be combined in one prefabricated cascade system, with inputs up to 4240 MBH; the page prints eight-boiler maximums of 1,280,000 to 4,240,000 BTU depending on the boiler size. The technical data lists the B2HB-160, B2HB-199, B2HA-285, B2HA-311, B2HA-352, B2HA-399 and B2HA-530 as the boiler rows (the B2HB rows are the legacy HO1B-control generation; the current catalogue is the B2HA line, and the cascade page still prints both as listed). Single-boiler weights print at 210 lb for the B2HB models, 194 lb for the B2HA-285/311/352 and 298 lb for the B2HA-399/530.
Cascades are controlled by the Vitotronic 300-K, MW2C cascade control: a boiler and system control with outdoor reset that modulates, stages and rotates up to eight boilers (with Vitotronic 200, HO1B controls), regulates boiler water and common supply temperature, and can control up to two mixing-valve heating circuits with an optional extension module. The system uses the Lambda Pro combustion management system, common vents up to four boilers, and carries a limited 10-year commercial warranty.
Highlights
- Prefabricated multiple-boiler cascade of wall-hung Vitodens 200-W condensing boilers
- Rated input 32 to 4240 MBH; as many as eight boilers per system (4,240,000 BTU with B2HA-530)
- Vitotronic 300-K, MW2C cascade control: modulate, stage and rotate up to eight boilers
- Prefabricated manifold plus integrated low-loss header — no pipe or manifold sizing required
- Common venting of up to four boilers; Lambda Pro combustion management system
- Ideal for small or difficult-to-access boiler rooms; limited 10-year commercial warranty
Models
Vitodens 200-W Cascade Systems models
One canonical page per model with input, output and efficiency kept separate.
Error codes and alerts
Vitodens 200-W Cascade Systems alerts
No alerts documented for this series yet.
Manuals
Official documents
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Services for Viessmann boilers
Frequently asked questions
How much capacity can a Vitodens 200-W cascade reach?
Up to eight boilers in a single prefabricated system, with inputs up to 4240 MBH. The page prints eight-boiler maximums from 1,280,000 BTU (B2HB-160) up to 4,240,000 BTU (B2HA-530).
Which boilers does the cascade system use?
The page's technical data lists B2HB-160, B2HB-199, B2HA-285, B2HA-311, B2HA-352, B2HA-399 and B2HA-530 rows. The B2HB rows are the legacy HO1B-control generation; current catalogue boilers are the B2HA models, and the cascade page still prints both as listed.
What control does the cascade use?
The Vitotronic 300-K, MW2C cascade control per the page: outdoor reset, modulating/staging/rotating up to eight boilers with Vitotronic 200 HO1B controls, common supply temperature regulation, and up to two mixing circuits with an optional extension module.
Talk to a boiler technician
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Viessmann Canada — Vitodens 200-W Cascade Systems product page · accessed September 9, 2026
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.