Skip to content
Boilers.caby ROMA Heating & Cooling

Westinghouse service

Westinghouse: new gas boiler installation, sized from a heat-loss calculation, not a guess

ROMA Heating & Cooling installs new gas boilers in Greater Vancouver homes, townhouses, strata buildings and light-commercial properties, including hydronic design, venting, gas supply, permits and commissioning.

Get a ballpark estimateCall 778-909-5731

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Gas Boiler Installation for Westinghouse boilers

A boiler installation is a system project, not an appliance swap. The boiler must match the building's heat loss, the emitters must be able to deliver that heat at condensing temperatures, venting must reach a permitted terminal, and the gas supply must carry the input. ROMA plans all of that before a boiler is ordered.

Installation covers new hydronic systems in renovations and new builds, boilers for in-floor heating, indirect tank pairings and combi boilers. Every installation in BC requires gas and heating permits and, where applicable, a Technical Safety BC inspection; these are handled as part of the job.

Working on a Westinghouse boiler? Have the model name and any alert text ready. Browse Westinghouse series, models and error codes to find yours; the details carry through when you request service.

What's included

  • Heat-loss calculation and boiler selection for your building and emitters
  • Supply and installation of the boiler, venting, condensate handling and near-boiler piping
  • Gas supply sizing and connection by a licensed gas fitter
  • Permits, Technical Safety BC requirements and commissioning with a combustion analyser
  • Controls set-up and a walkthrough of operation and maintenance

Not included

  • Electrical panel upgrades or work outside the mechanical room unless quoted
  • Building-envelope work that a heat-loss calculation might recommend
  • Rebates or financing unless verified programs are listed on this site

Process

How it works

  1. 01

    Ballpark estimate

    Use the instant estimator for a CAD range, or call. The range is a starting point, not a quote.

  2. 02

    Assessment

    A site visit covers heat loss, emitters, venting route, gas supply, condensate drainage and access.

  3. 03

    Proposal

    A written proposal lists the boiler, scope, exclusions, permits and price.

  4. 04

    Installation and commissioning

    Installed by licensed technicians, commissioned and documented, with permits closed out.

Why ROMA

4.8★

4.8★ from 221+ Google reviews

As published by ROMA Heating & Cooling on romaheating.ca, checked September 8, 2026.

Technical Safety BC licensed gas contractor

Gas licence LGA0202903, as published by ROMA.

Source: romaheating.ca

Serving Greater Vancouver since 1999

As stated on romaheating.ca.

Source: romaheating.ca

Licensed, bonded and insured

Technicians are bonded, insured and Red Seal-trained, as published by ROMA.

Source: romaheating.ca

Upfront flat-rate pricing

ROMA publishes that pricing is approved before work starts, with no hidden fees.

Source: romaheating.ca

Authorized for 30+ brands

ROMA states it is authorized for brands including Lennox, Carrier, Viessmann, Navien and Rheem.

Source: romaheating.ca

Frequently asked questions

How is a boiler sized?

By calculating the building's heat loss room by room and adding any indirect-tank demand. Floor area alone is not a sizing method, and oversizing causes short cycling.

Do I need a permit to install a boiler in BC?

Yes. Gas appliance installation and replacement requires a gas permit, and municipalities such as Burnaby also require a heating-system permit. ROMA obtains them as part of the installation.

How long does an installation take?

A like-for-like wall-hung replacement is often a single day; new venting, gas-line upgrades, indirect tanks or hydronic changes add time. The proposal states the expected duration.

Get a ballpark estimate in two minutes

Answer a few questions for a CAD range before you share any contact details.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Call 778-909-5731Start the estimate

Related services and help

Sources and verification

  • Editorial content by Boilers.ca; no external technical claims.

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate