Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

American Standard AGBWF090A93AV vs AGBWF130A94AV

Verdict in brief

The two smallest American Standard natural draft gas boilers share the same 33.5 in high, 24.2 in deep cabinet and the same 83.5-83.6% AFUE band, but the 130 fires 40,000 BTU/hr more at the top and delivers 35,000 BTU/hr more heat capacity. The 090 is 2.1 in narrower and 69 lb lighter, which is the practical difference when replacing an old unit in a tight boiler room.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of American Standard AGBWF090A93AV (natural draft gas boiler) and American Standard AGBWF130A94AV (natural draft gas boiler)
SpecificationAmerican Standard AGBWF090A93AV (natural draft gas boiler)American Standard AGBWF130A94AV (natural draft gas boiler)
Vent style (as printed)Natural draftNatural draft
Input (as printed)90,000 BTU/hr130,000 BTU/hr
Heat capacity (as printed)76,000 BTU/hr111,000 BTU/hr
AFUE (as printed)83.6 %83.5 %
Height (as printed)33.5 in33.5 in
Width (as printed)15.8 in19.7 in
Depth (as printed)24.2 in24.2 in
Shipping weight (as printed)276 lb345 lb

What actually separates them

Both models are natural draft (chimney-vented) cast iron water boilers from the line American Standard launched in 2007, and both are documented on the archived official gas page with a complete rating row. The AGBWF090A93AV prints 83.6% AFUE, 90,000 BTU/hr input and 76,000 BTU/hr heat capacity; the AGBWF130A94AV prints 83.5%, 130,000 BTU/hr and 111,000 BTU/hr.

The cabinets share the same 33.5 in height and 24.2 in depth, but the smaller model is 15.8 in wide and ships at 276 lb against 19.7 in and 345 lb for the 130 - useful when the replacement has to pass through an existing doorway or fit an old boiler alcove. Both list the same cast iron heat exchanger, stainless steel tubular burner, electronic ignition and standard electric vent damper.

Because efficiency differs by only 0.1 points, the choice is a sizing decision: the 090 suits a home whose heat loss fits 76,000 BTU/hr of capacity, while the 130 covers larger loads and longer distribution runs. Boilers.ca publishes both rating rows so the comparison can be made against the original load calculation rather than floor area.

Frequently asked questions

Which of the two is more efficient?

The AGBWF090A93AV prints 83.6% AFUE against 83.5% for the AGBWF130A94AV - a 0.1 point difference that does not decide the selection; the calculated heat loss does.

Do both use a vent damper?

Yes. The archived official comparison chart lists a standard electric vent damper for the natural draft models; the direct vent model does not carry that line.

Are the cabinets the same size?

They share height (33.5 in) and depth (24.2 in), but the 090 is 15.8 in wide at 276 lb against 19.7 in and 345 lb for the 130.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate