Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Cleaver-Brooks ClearFire-V 50 HP vs ClearFire-V 60 HP

Verdict in brief

The ClearFire-V 60 HP is rated 2,070 lb/hr steam from and at 212°F against the ClearFire-V 50 HP's 1,725 lb/hr. The 50 HP and 60 HP are the largest CFV sizes: both use a 3 in steam outlet, 1-1/4 in feedwater, 1-1/2 in gas, a 10 in stack, 8 in combustion air and a 1,200 W blower, with the 60 HP adding 345 lb/hr of steam capacity.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Cleaver-Brooks ClearFire-V 50 HP and Cleaver-Brooks ClearFire-V 60 HP
SpecificationCleaver-Brooks ClearFire-V 50 HPCleaver-Brooks ClearFire-V 60 HP
Rated capacity — steam1,725 lb/hr2,070 lb/hr
Output1,674,000 BTU/hr2,008,000 BTU/hr
Fireside heating surface312 sq ft388 sq ft
Natural gas input at rated capacity2,066 cfh2,479 cfh
Design pressure150 psig design; 60 psig minimum operating150 psig design; 60 psig minimum operating
Blower motor1200 W, single-phase 115 VAC1200 W, single-phase 115 VAC
Steam outlet3"3"

What actually separates them

The captured official documents do not print an efficiency column for both sizes, so the comparison rests on capacity and the printed mechanical data. The ClearFire-V 60 HP is rated 2,070 lb/hr steam from and at 212°F against the ClearFire-V 50 HP's 1,725 lb/hr. The 50 HP and 60 HP are the largest CFV sizes: both use a 3 in steam outlet, 1-1/4 in feedwater, 1-1/2 in gas, a 10 in stack, 8 in combustion air and a 1,200 W blower, with the 60 HP adding 345 lb/hr of steam capacity.

Water and pressure data are printed in the family document. Pressure rating: 150 psig design; 60 psig minimum operating on the smaller unit against 150 psig design; 60 psig minimum operating on the larger.

Both models are documented in the same official Cleaver-Brooks material, so the choice is a load and plant-layout decision: size to the calculated demand, then verify connections, venting and weight in the family document for the exact model.

Status unknownCanadian status unknown
Input
Output (max)
1,674,000 BTU/hr
AFUE

The Cleaver-Brooks ClearFire-V 50 HP is a vertical gas-fired steam boiler rated 1,725 lb/hr steam from and at 212°F and 1,674 thousand BTU/hr output, with 312 sq ft of fireside heating surface per the official CB-8265 ratings.

Natural gasHeating-only
Status unknownCanadian status unknown
Input
Output (max)
2,008,000 BTU/hr
AFUE

The Cleaver-Brooks ClearFire-V 60 HP is a vertical gas-fired steam boiler rated 2,070 lb/hr steam from and at 212°F and 2,008 thousand BTU/hr output, with 388 sq ft of fireside heating surface per the official CB-8265 ratings.

Natural gasHeating-only

Frequently asked questions

What is the largest ClearFire-V size?

The 60 HP at 2,070 lb/hr steam from and at 212°F and 2,008 thousand BTU/hr output, per CB-8265.

What pressure are they designed for?

The ClearFire-V brochure prints 150 psig design pressure and 60 psig minimum operating pressure across the 9.5–60 HP line.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate