Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Cleaver-Brooks ClearFire-V 9.5 HP vs ClearFire-V 10 HP

Verdict in brief

The ClearFire-V 10 HP is rated 345 lb/hr steam from and at 212°F against the ClearFire-V 9.5 HP's 328 lb/hr. The 9.5 HP and 10 HP are adjacent ratings of the same package: 65 sq ft of heating surface and a 335 W blower on both, with a 17 lb/hr steam step between them.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Cleaver-Brooks ClearFire-V 9.5 HP and Cleaver-Brooks ClearFire-V 10 HP
SpecificationCleaver-Brooks ClearFire-V 9.5 HPCleaver-Brooks ClearFire-V 10 HP
Rated capacity — steam328 lb/hr345 lb/hr
Output318,000 BTU/hr335,000 BTU/hr
Fireside heating surface65 sq ft65 sq ft
Natural gas input at rated capacity393 cfh413 cfh
Design pressure150 psig design; 60 psig minimum operating150 psig design; 60 psig minimum operating
Blower motor335 W, single-phase 115 VAC335 W, single-phase 115 VAC
Steam outlet1-1/2"1-1/2"

What actually separates them

The captured official documents do not print an efficiency column for both sizes, so the comparison rests on capacity and the printed mechanical data. The ClearFire-V 10 HP is rated 345 lb/hr steam from and at 212°F against the ClearFire-V 9.5 HP's 328 lb/hr. The 9.5 HP and 10 HP are adjacent ratings of the same package: 65 sq ft of heating surface and a 335 W blower on both, with a 17 lb/hr steam step between them.

Water and pressure data are printed in the family document. Pressure rating: 150 psig design; 60 psig minimum operating on the smaller unit against 150 psig design; 60 psig minimum operating on the larger.

Both models are documented in the same official Cleaver-Brooks material, so the choice is a load and plant-layout decision: size to the calculated demand, then verify connections, venting and weight in the family document for the exact model.

Status unknownCanadian status unknown
Input
Output (max)
318,000 BTU/hr
AFUE

The Cleaver-Brooks ClearFire-V 9.5 HP is a vertical gas-fired steam boiler rated 328 lb/hr steam from and at 212°F and 318 thousand BTU/hr output, with 65 sq ft of fireside heating surface per the official CB-8265 ratings.

Natural gasHeating-only
Status unknownCanadian status unknown
Input
Output (max)
335,000 BTU/hr
AFUE

The Cleaver-Brooks ClearFire-V 10 HP is a vertical gas-fired steam boiler rated 345 lb/hr steam from and at 212°F and 335 thousand BTU/hr output, with 65 sq ft of fireside heating surface per the official CB-8265 ratings.

Natural gasHeating-only

Frequently asked questions

What is the difference between the 9.5 and 10 HP CFV?

CB-8265 prints 328 lb/hr steam for the 9.5 HP and 345 lb/hr for the 10 HP, both with 65 sq ft of heating surface and a 335 W blower.

Are the connections the same?

Yes — 1-1/2 in steam, 1 in feedwater, 1 in gas, 6 in stack and 4 in combustion air on both.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate