Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Accel CS EK1C-90 vs EK1C-120

Verdict in brief

The Accel CS EK1C-90 and EK1C-120 are the two ENERGY STAR listed EK1C models, both above 96% AFUE. The 120 adds 30 MBH of input and 27 MBH of capacity and raises the hot-water first-hour rating from 155 to 195 gallons, at a 0.2-point lower AFUE (96.4% vs 96.6%).

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Energy Kinetics Accel CS EK1C-90 and Energy Kinetics Accel CS EK1C-120
SpecificationEnergy Kinetics Accel CS EK1C-90Energy Kinetics Accel CS EK1C-120
Input90 MBH120 MBH
Capacity84 MBH111 MBH
Efficiency (AFUE)96.6 %96.4 %
Hot water first-hour rating155 gal/hr195 gal/hr
Domestic hot waterIntegrated condensing system: heat plus hot water through the Condensing Energy Manager and plate heat exchangerIntegrated condensing system: heat plus hot water through the Condensing Energy Manager and plate heat exchanger

What actually separates them

Both models share the Accel CS platform — the 316L stainless-steel vessel with over 70 pounds of stainless steel, 37 stainless turbulators, Sealix-coated plate heat exchangers and the Condensing Energy Manager control. The brochure's ratings table prints the EK1C-90 at 90 MBH input, 84 MBH capacity, 96.6% AFUE and a 155 gal/hr hot-water first-hour rating; the EK1C-120 at 120 MBH input, 111 MBH capacity, 96.4% AFUE and 195 gal/hr.

The AFUE difference of 0.2 points is not the deciding factor. Capacity and hot-water delivery are: the 120 covers larger heating loads and roughly 26% more first-hour hot water, which is the reason to step up in a household with bigger or simultaneous draws.

Both models are named in the brochure's ENERGY STAR statement, and both are described with multiple venting options and natural-gas-or-propane operation, so the vent route does not force the choice between them.

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
96.6 %

The Energy Kinetics Accel CS EK1C-90 is the smallest Accel CS model, listed as meeting ENERGY STAR guidelines: 90 MBH input with 84 MBH capacity at 96.6% AFUE and a 155 gal/hr hot-water first-hour rating on the 316L stainless-steel condensing platform.

Natural gasPropaneHeating-only
CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
96.4 %

The Energy Kinetics Accel CS EK1C-120 is the larger EK1C model, also listed as meeting ENERGY STAR guidelines: 120 MBH input with 111 MBH capacity at 96.4% AFUE and a 195 gal/hr hot-water first-hour rating on the 316L stainless-steel condensing platform.

Natural gasPropaneHeating-only

Frequently asked questions

Which Accel CS model is more efficient?

The EK1C-90 at 96.6% AFUE against 96.4% on the EK1C-120, per the residential brochure ratings table.

How much more hot water does the EK1C-120 deliver?

195 gal/hr first-hour rating against 155 gal/hr on the EK1C-90, based on a first-hour draw with a 67°F rise and a 3 GPM draw on a 40-gallon tank per the brochure footnote.

Are both models ENERGY STAR listed?

Yes — the brochure states model EK1C-90 and EK1C-120 meet ENERGY STAR guidelines for energy efficiency.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate