Canada-wide gas boiler information · On-site service in Greater Vancouver, BC
Boilers.ca is a brand of ROMA Heating & Cooling · Licensed gas contractor LGA0202903
Comparison
Verdict in brief
HTP Elite XL ELX-650FBN and HTP Elite XL ELX-800FBN are two condensing boilers from the HTP Elite XL Commercial Condensing Boiler line. The HTP Elite XL ELX-650FBN is documented at 65–650 MBH input, 630 MBH heating capacity and Up to 97% thermal efficiency, while the HTP Elite XL ELX-800FBN is documented at 80–800 MBH input, 776 MBH heating capacity and Up to 97% thermal efficiency. HTP Elite XL ELX-800FBN lists 150 MBH more input than HTP Elite XL ELX-650FBN (800 MBH against 650 MBH). Both list the same published thermal efficiency of Up to 97%. HTP Elite XL ELX-800FBN lists 20 lb more shipping weight than HTP Elite XL ELX-650FBN (700 lb against 680 lb).
Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.
| Specification | HTP Elite XL ELX-650FBN | HTP Elite XL ELX-800FBN |
|---|---|---|
| Input rate, minimum | 65 MBH | 80 MBH |
| Input rate, maximum | 650 MBH | 800 MBH |
| Heating capacity | 630 MBH | 776 MBH |
| Thermal efficiency (page and submittal claim) | Up to 97% | Up to 97% |
| Turndown | Up to 10:1 | Up to 10:1 |
| Boiler water content | 5.6 gal | 6.6 gal |
| Shipping weight | 680 lb | 700 lb |
| Dimensions (W x H x D) | 26" W x 41" H x 56.5" D | 26" W x 41" H x 56.5" D |
| Minimum flow rate at 20 °F ΔT at low fire | 6.5 GPM | 8 GPM |
| Power supply | 120 V / 60 Hz, less than 12 A | 120 V / 60 Hz, less than 12 A |
| Flow switch activation | 4 GPM | 4 GPM |
| Gas connection | 1" NPT | 1" NPT |
| Supply / return connection | 2" NPT | 2" NPT |
| Vent size and maximum combined run | 6" adapter — 6" (125 ft) max combined, 10 ft minimum | 6" adapter — 6" (125 ft) max combined, 10 ft minimum |
| Packaging dimensions (W x H x D) | 32.25" W x 49.625" H x 64" D | 32.25" W x 49.625" H x 64" D |
| Gas supply pressure | Natural gas or LP: 3.5"–14" w.c. | Natural gas or LP: 3.5"–14" w.c. |
| Heat exchanger | 316L stainless steel water tube, 160 PSI ASME stamped, National Board listed, gasketless | 316L stainless steel water tube, 160 PSI ASME stamped, National Board listed, gasketless |
| Water pressure | Heat exchanger MAWP 160 psi; ASME 50 psi relief valve | Heat exchanger MAWP 160 psi; ASME 50 psi relief valve |
| DHW indirect setpoint range | 70–185 °F | 70–185 °F |
| Control | 928 digital operating control with color touchscreen; HTP Link Wi-Fi standard | 928 digital operating control with color touchscreen; HTP Link Wi-Fi standard |
| Approved vent materials | PVC, CPVC, polypropylene or stainless steel | PVC, CPVC, polypropylene or stainless steel |
| Safety devices | Flame rectifier probe, dual water supply temperature sensor/high limit (210 °F), freeze protection, condensate trap with float, dual flue sensor (210 °F), blocked vent pressure switch, integrated UL 353 CSD-1 low-water cut-off, high-resolution flow switch | Flame rectifier probe, dual water supply temperature sensor/high limit (210 °F), freeze protection, condensate trap with float, dual flue sensor (210 °F), blocked vent pressure switch, integrated UL 353 CSD-1 low-water cut-off, high-resolution flow switch |
| Warranty | Five (5) year basic / ten (10) year extended limited warranty on the heat exchanger | Five (5) year basic / ten (10) year extended limited warranty on the heat exchanger |
Published ratings: the HTP Elite XL ELX-650FBN is rated 65–650 MBH input, 630 MBH heating capacity and Up to 97% thermal efficiency; the HTP Elite XL ELX-800FBN is rated 80–800 MBH input, 776 MBH heating capacity and Up to 97% thermal efficiency. HTP Elite XL ELX-800FBN lists 150 MBH more input than HTP Elite XL ELX-650FBN (800 MBH against 650 MBH). Both list the same published thermal efficiency of Up to 97%.
HTP Elite XL ELX-800FBN lists 20 lb more shipping weight than HTP Elite XL ELX-650FBN (700 lb against 680 lb). The boiler water content differs: the HTP Elite XL ELX-650FBN lists 5.6 gal, while the HTP Elite XL ELX-800FBN lists 6.6 gal. The minimum flow rate at 20 °F δt at low fire differs: the HTP Elite XL ELX-650FBN lists 6.5 GPM, while the HTP Elite XL ELX-800FBN lists 8 GPM.
Both records print the same thermal efficiency (Up to 97%), turndown (Up to 10:1), dimensions (26" W x 41" H x 56.5" D) and electrical requirement (120 V / 60 Hz, less than 12 A), per the cited sources.
The HTP Elite XL ELX-650FBN is the 650 MBH class model of HTP's current commercial condensing line: 65 to 650 MBH input, 630 MBH heating capacity, a 316L stainless steel water-tube heat exchanger and up to 10:1 modulation in a 680 lb floor-standing cabinet.
The HTP Elite XL ELX-800FBN is the 800 MBH class model of HTP's current commercial condensing line: 80 to 800 MBH input, 776 MBH heating capacity, a 316L stainless steel water-tube heat exchanger and up to 10:1 modulation in a 700 lb floor-standing cabinet.
The HTP Elite XL ELX-800FBN lists 800 MBH, against 650 MBH on the HTP Elite XL ELX-650FBN, per the cited documentation.
Both list the same thermal efficiency of Up to 97%.
It ships at 700 lb against 680 lb for the HTP Elite XL ELX-650FBN, per the cited sources.
A consultation includes a heat-loss review so the size is right the first time.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.