Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Hurst Series 200 300 HP vs 500 HP

Verdict in brief

The Series 200 500 HP adds 6,900 lb/hr of steam output and 6,696 MBH of gross output over the 300 HP, moving from 1,500 to 2,500 sq ft of heating surface, 28,000 to 39,900 lb dry shipping weight high pressure, and 2,300 vs 1,764 gallons of steam-series water capacity at the same 5 sq ft per HP design rule.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Hurst Series 200 — 300 HP and Hurst Series 200 — 500 HP
SpecificationHurst Series 200 — 300 HPHurst Series 200 — 500 HP
Boiler horsepower300 HP500 HP
Steam output (from & at 212°F)10,350 LBS/HR17,250 LBS/HR
Gross output10,042 MBH16,738 MBH
Heating surface (fireside)1,500 SQ. FT.2,500 SQ. FT.
Firing rate, gas12,600 CFH21,000 CFH
Firing rate, LP gas137.7 GPH229.5 GPH
Firing rate, No. 2 oil90 GPH150 GPH
Firing rate, No. 5 & No. 6 oil84 GPH140 GPH
Water capacity, steam series (NWL)1,764 gal2,300 gal
Water capacity, water series (flooded)2,153 gal2,915 gal
Shipping weight, high pressure (dry)28,000 lb39,900 lb
Shipping weight, low pressure (dry)25,250 lb38,800 lb

What actually separates them

The brochure prints the 300 HP row at 10,350 lb/hr steam and 10,042 MBH gross output, and the 500 HP row at 17,250 lb/hr and 16,738 MBH, on 1,500 and 2,500 sq ft of heating surface respectively.

Firing rates step from 12,600 to 21,000 CFH natural gas, 137.7 to 229.5 GPH LP gas, 90 to 150 GPH No. 2 oil and 84 to 140 GPH No. 5/#6 oil. Water capacity (steam series, NWL) rises from 1,764 to 2,300 gallons and the flooded water-series figure from 2,153 to 2,915 gallons.

Dry shipping weight rises from 28,000 to 39,900 lb high pressure and from 25,250 to 38,800 lb low pressure, so rigging and foundation planning should follow the larger unit. Both sizes are two-pass dryback Scotch Marine designs within the 15–800 HP series range.

Hurst Boiler & Welding Co., Inc.

Hurst Series 200 — 300 HP

CurrentCanadian status unknown
Input
Output (max)
AFUE

The Hurst Series 200 300 HP is a two-pass dryback Scotch Marine firetube boiler rated 10,350 lb/hr steam output and 10,042 MBH gross output on 1,500 sq ft of heating surface in Hurst's published capacity table.

Natural gasPropaneHeating-only

Hurst Boiler & Welding Co., Inc.

Hurst Series 200 — 500 HP

CurrentCanadian status unknown
Input
Output (max)
AFUE

The Hurst Series 200 500 HP is a two-pass dryback Scotch Marine firetube boiler rated 17,250 lb/hr steam output and 16,738 MBH gross output on 2,500 sq ft of heating surface in Hurst's published capacity table.

Natural gasPropaneHeating-only

Frequently asked questions

How much more steam does the 500 HP make?

6,900 lb/hr more: 17,250 against 10,350 lb/hr from and at 212°F, per the Series 200 brochure.

How much does the 500 HP weigh?

The brochure prints 39,900 lb dry shipping weight high pressure against 28,000 lb for the 300 HP.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate