Lochinvar
Lochinvar Squire SIT065
- Input
- —
- Output (max)
- —
- AFUE
- —
The Lochinvar Squire SIT065 is a 67-gallon single-wall indirect water heater with a 316L stainless steel tank and coil, 0.7°F/hr standby loss and a 147 lb shipping weight.
Canada-wide gas boiler information · On-site service in Greater Vancouver, BC
Boilers.ca is a brand of ROMA Heating & Cooling · Licensed gas contractor LGA0202903
Comparison
Verdict in brief
The Squire SIT065 and SIT119 are the larger single-wall tanks: 67 versus 113 gallons, standby loss of 0.7 versus 0.5°F/hr and shipping weights of 147 versus 213 lb. Both use 1-1/2" domestic connections, 1" boiler connections and a 14.0 gpm flow rate.
Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.
| Specification | Lochinvar Squire SIT065 | Lochinvar Squire SIT119 |
|---|---|---|
| Domestic water capacity | 67 gal | 113 gal |
| Heat source water volume | 1.9 gal | 3.2 gal |
| Standby loss | 0.7 °F/hr | 0.5 °F/hr |
| First draw | 65 gal | 109 gal |
| Continuous delivery | 263 GPH | 308 GPH |
| First hour delivery | 328 gal | 418 gal |
| Minimum coil load | 154,000 BTU/hr | 199,999 BTU/hr |
| Flow rate | 14 GPM | 14 GPM |
| Domestic water connections | 1-1/2" | 1-1/2" |
| Shipping weight | 147 lb | 213 lb |
The SIT-Sub-03 table lists the SIT065 at 67 gallons capacity with 0.7°F/hr standby loss, 14.0 gpm flow and 5.7 ft friction loss; the SIT119 lists 113 gallons with 0.5°F/hr standby loss, the same 14.0 gpm flow and 6.5 ft of friction loss.
Both models use 1-1/2" domestic connections and 1" boiler supply/return connections, so the decision is driven by stored volume and recovery rather than piping.
The 119's larger tank adds 66 lb of shipping weight and stores nearly twice the domestic water, which suits larger households or higher simultaneous draws.
Lochinvar
The Lochinvar Squire SIT065 is a 67-gallon single-wall indirect water heater with a 316L stainless steel tank and coil, 0.7°F/hr standby loss and a 147 lb shipping weight.
Lochinvar
The Lochinvar Squire SIT119 is a 113-gallon single-wall indirect water heater with a 316L stainless steel tank and coil, 0.5°F/hr standby loss and a 213 lb shipping weight.
The SIT065 holds 67 gallons and the SIT119 holds 113 gallons of domestic water per the SIT-Sub-03 submittal.
Yes — both print 1-1/2" domestic connections and 1" boiler supply/return connections in the submittal table.
A consultation includes a heat-loss review so the size is right the first time.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.