Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Miura LX 100 vs LX 150/200

Verdict in brief

The LX 150/200 roughly doubles the LX 100's steam output (5,180–6,900 vs 3,450 lb/hr) while keeping the same 85% efficiency, 9 ppm NOx figure and 70–150 PSI standard pressure; the 200 BHP build is also the first LX size with a high-pressure configuration at 170–270 PSI and 84% efficiency.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Miura LX 100 and Miura LX 150/200
SpecificationMiura LX 100Miura LX 150/200
Horsepower100 BHP150-200 BHP
Steam output3,450 LB/HR5,180-6,900 LB/HR
Standard pressure range70-150 PSI70-150 PSI
Low-pressure configuration15 PSI15 PSI (200 BHP)
High-pressure configuration—170-270 PSI (200 BHP, 84%)
Efficiency (standard pressure)85 %85 %
NOx emissions (standard pressure)As low as 9 PPM NOxAs low as 9 PPM NOx
Fuel typeNatural Gas or PropaneNatural Gas or Propane

What actually separates them

Miura prints the LX 100 at 100 BHP / 3,450 lb/hr and the LX 150/200 at 150–200 BHP / 5,180–6,900 lb/hr, both at 85% efficiency and both 'as low as 9 PPM NOx' in standard pressure. The step up buys steam capacity rather than efficiency or emissions.

The 150/200 group introduces the first high-pressure LX row: a 200 BHP build at 170–270 PSI with 84% efficiency, which the LX 100 does not offer. Plants that need process steam above 150 PSI should compare that row against the standard-pressure option.

Both sizes carry low-pressure (15 PSI) configurations — LXL-100SG-07/SGN-07 for the 100 and LXL-150/200 builds for the larger group — so retrofits into existing low-pressure headers can use either size.

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
—

The Miura LX 100 is a low-NOx once-through watertube steam boiler rated 100 BHP with 3,450 LB/HR of steam output at 70-150 PSI standard pressure, 85% efficiency and As low as 9 PPM NOx in Miura's published rating table.

Natural gasPropaneHeating-only
CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
—

The Miura LX 150/200 is a low-NOx once-through watertube steam boiler rated 150-200 BHP with 5,180-6,900 LB/HR of steam output at 70-150 PSI standard pressure, 85% efficiency and As low as 9 PPM NOx in Miura's published rating table.

Natural gasPropaneHeating-only

Frequently asked questions

When does the LX 150/200 make sense over the LX 100?

When the calculated steam load exceeds the LX 100's 3,450 lb/hr, or when the plant needs the 170–270 PSI high-pressure configuration that only appears from the 200 BHP build.

Is there an emissions difference?

No. Both sizes are printed 'as low as 9 PPM NOx' in standard pressure, with SGN build codes available.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate