Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Miura LX 150/200 vs LX 250/300

Verdict in brief

The LX 250/300 is Miura's largest LX group: 250–300 BHP and 8,630–10,350 lb/hr against the LX 150/200's 5,180–6,900 lb/hr, with standard-pressure efficiency rising from 85% to 87% and NOx falling from as low as 9 ppm to as low as 5 ppm — including the LXN-300SG-A 5 ppm build.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Miura LX 150/200 and Miura LX 250/300
SpecificationMiura LX 150/200Miura LX 250/300
Horsepower150-200 BHP250-300 BHP
Steam output5,180-6,900 LB/HR8,630-10,350 LB/HR
Standard pressure range70-150 PSI70-150 PSI
Low-pressure configuration15 PSI (200 BHP)15 PSI (300 BHP)
High-pressure configuration170-270 PSI (200 BHP, 84%)170-270 PSI (250-300 BHP, 86%)
Efficiency (standard pressure)85 %87 %
NOx emissions (standard pressure)As low as 9 PPM NOxAs low as 5 PPM NOx (standard pressure)
Fuel typeNatural Gas or PropaneNatural Gas or Propane

What actually separates them

Miura's table prints the LX 250/300 at 250–300 BHP, 8,630–10,350 lb/hr and 87% efficiency at standard pressure — two points above the LX 150/200's 85% — with emissions 'as low as 5 PPM NOx' on the standard-pressure 250/300 rows against 'as low as 9 PPM' on the 150/200.

The 5 ppm figure is backed by a dedicated build code, LXN-300SG-A, on Miura's Technical Resources page. In high pressure, both groups print 170–270 PSI, but the 250/300 runs at 86% and as low as 12 ppm NOx against 84% and no high-pressure NOx row on the 150/200.

Both groups offer 15 PSI low-pressure configurations. For a plant weighing a small number of larger boilers against more smaller ones, the 250/300's better standard-pressure efficiency and lower NOx are the deciding numbers; the 150/200 remains the match when the load sits nearer 6,000 lb/hr.

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
—

The Miura LX 150/200 is a low-NOx once-through watertube steam boiler rated 150-200 BHP with 5,180-6,900 LB/HR of steam output at 70-150 PSI standard pressure, 85% efficiency and As low as 9 PPM NOx in Miura's published rating table.

Natural gasPropaneHeating-only
CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
—

The Miura LX 250/300 is a low-NOx once-through watertube steam boiler rated 250-300 BHP with 8,630-10,350 LB/HR of steam output at 70-150 PSI standard pressure, 87% efficiency and As low as 5 PPM NOx (standard pressure) in Miura's published rating table.

Natural gasPropaneHeating-only

Frequently asked questions

Which LX group is more efficient?

The LX 250/300, at 87% standard-pressure efficiency against 85% on the LX 150/200.

What is the lowest LX NOx rating?

As low as 5 ppm NOx on the standard-pressure LX 250/300, with the LXN-300SG-A build code listed on Miura's Technical Resources page.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate