Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Pennco FSB-2 vs FSB-4

Verdict in brief

The FSB-2 and FSB-4 share the same 29-inch height, 23-1/4-inch depth, 4-inch chimney connection and 3-inch sidewall option, but the FSB-4 nearly triples input (112.5 vs 42.5 MBH) and capacity while adding about 97 lb and widening the cabinet from 11 to 17-1/2 inches. The FSB-2 prints the line's highest AFUE at 84.4% against 84%.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Pennco FSB-2 and Pennco FSB-4
SpecificationPennco FSB-2Pennco FSB-4
Input42.5 MBH112.5 MBH
Heating capacity36 MBH95 MBH
Net water rating31 MBH82 MBH
Efficiency (AFUE)84.4 %84 %
Venting (chimney / sidewall)4" chimney / 3" sidewall4" chimney / 3" sidewall
Approx. shipping weight225 lb322 lb
Dimensions (width × height × depth)11" × 29" × 23-1/4"17-1/2" × 29" × 23-1/4"
Domestic hot waterHeating-only boiler — domestic hot water comes from a separate indirect tank or water heaterHeating-only boiler — domestic hot water comes from a separate indirect tank or water heater

What actually separates them

Both boilers use the FSB cast-iron section assembly with cast-iron push nipples and the control that delays burner start until residual heat is transferred. Their rows print the same venting options — 4-inch chimney, 3-inch sidewall — with AFUE at 84.4% on the FSB-2 and 84% on the FSB-4, a difference too small to drive the decision.

Capacity is the deciding variable: the FSB-2 covers 42.5 MBH input with 36 MBH heating capacity and 31 MBH net water rating, while the FSB-4 covers 112.5/95/82 MBH. Water content, cabinet width and weight scale with the section count — 11 inches and 225 lb on the FSB-2 against 17-1/2 inches and 322 lb on the FSB-4.

Both are design certified for installation on a noncombustible floor and tested for 50 PSI ASME working pressure, and both accept the optional Fill-Trol and thimble. Size from the heat-loss calculation and radiation load.

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
84.4 %

The Pennco FSB-2 is the smallest FSB size and the only 84.4% AFUE row: 42.5 MBH input with 36 MBH heating capacity and a 31 MBH net water rating at 84.4% AFUE, vented through a 4" chimney or 3" sidewall connection.

Natural gasPropaneHeating-only
CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
84 %

The Pennco FSB-4 is the mid-size FSB: 112.5 MBH input with 95 MBH heating capacity and a 82 MBH net water rating at 84% AFUE, vented through a 4" chimney or 3" sidewall connection.

Natural gasPropaneHeating-only

Frequently asked questions

Which FSB size is more efficient?

The FSB-2 at 84.4% AFUE; the FSB-4 prints 84%, per the FSB sell sheet ratings table.

Do both models offer sidewall venting?

Yes — both list a 4-inch chimney connection and a 3-inch sidewall option; only the FSB-6 steps up to a 4-inch sidewall.

What makes the FSB series different?

Cast-iron push nipples let the sections and nipples expand at the same rate for a gasket-free seal, and the control delays the burner start until residual heat is transferred.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate