Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Rinnai RXP160iN vs RXP199iN

Verdict in brief

The two SENSEI RXP condensing tankless water heaters differ in capacity and efficiency at the top: the RXP160iN prints 0.97 UEF with 160,000 BTU/h and 9.0 GPM, the RXP199iN 0.98 UEF with 199,000 BTU/h and 11.1 GPM. Both share a 15,000 BTU/h minimum and the same cabinet.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Rinnai RXP160iN and Rinnai RXP199iN
SpecificationRinnai RXP160iNRinnai RXP199iN
Minimum input (hero bullet)15 MBH15 MBH
Maximum input (hero bullet)160 MBH199 MBH
Uniform Energy Factor (UEF)0.97 UEF0.98 UEF
Domestic hot water flow rate (maximum)9 GPM11.1 GPM
Product weight57 lb58 lb

What actually separates them

The RXP160iN and RXP199iN are Rinnai's premium condensing tankless pair, both DHW-only water heaters with a 15,000 BTU/h minimum fire and the shared 18.5 x 30.11 x 11.4 in cabinet — 57 lb on the 160 and 58 lb on the 199.

The RXP199iN steps up on both capacity and efficiency: 199,000 against 160,000 BTU/h of maximum input, 11.1 against 9.0 GPM of maximum flow and 0.98 against 0.97 UEF. The higher UEF reflects the larger unit's part-load behaviour in the test cycle.

Both install indoors or outdoors on natural gas or liquid propane with no conversion kit, and both are recirculation-capable, Wi-Fi capable, ENERGY STAR rated and SCAQMD Ultra Low NOx approved. As with all Rinnai tankless models, sizing follows peak hot-water demand, and space heating requires a boiler or combi.

CurrentSold in Canada
Input
15–160 MBH
Output (max)
AFUE

The Rinnai RXP160iN is a SENSEI RXP condensing tankless water heater — a DHW-only appliance, not a boiler — firing 15,000 to 160,000 BTU/h at 0.97 UEF with up to 9 GPM maximum flow.

Natural gasPropaneDHW-only (tankless)
CurrentSold in Canada
Input
15–199 MBH
Output (max)
AFUE

The Rinnai RXP199iN is a SENSEI RXP condensing tankless water heater — a DHW-only appliance, not a boiler — firing 15,000 to 199,000 BTU/h at 0.98 UEF with up to 11.1 GPM maximum flow.

Natural gasPropaneDHW-only (tankless)

Frequently asked questions

What is the difference between the RXP160iN and RXP199iN?

Maximum input (160,000 against 199,000 BTU/h), maximum flow (9.0 against 11.1 GPM) and UEF (0.97 against 0.98). Both share the same minimum fire and cabinet.

Is the RXP a boiler?

No. The SENSEI RXP models are condensing tankless water heaters for domestic hot water only; they have no space-heating circuit.

Which RXP should replace a failing tank?

The one whose published flow covers the household's peak demand at the coldest expected inlet temperature. The RXP199iN's 11.1 GPM gives more headroom; a licensed contractor should verify the sizing.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate