Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Takagi T-D2-IN-P vs Takagi T-D2-OS-N

Verdict in brief

Takagi T-D2-IN-P and Takagi T-D2-OS-N are two tankless water heaters from the Takagi T-D2 Series line. Published ratings: Takagi T-D2-IN-P at 11,000–199,000 BTU/h input and 0.8% efficiency; Takagi T-D2-OS-N at 11,000–199,000 BTU/h input and 0.8% efficiency. Both list the same published input of 199,000 BTU/h. Both list the same published efficiency of 0.8%. Both list the same published shipping weight of 45 lb.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Takagi T-D2-IN-P and Takagi T-D2-OS-N
SpecificationTakagi T-D2-IN-PTakagi T-D2-OS-N
Input, minimum11,000 BTU/h11,000 BTU/h
Input, maximum199,000 BTU/h199,000 BTU/h
Weight45 lb45 lb
Dimensions (H × W × D)20-1/4 × 13-3/4 × 9-1/2 in20-1/4 × 13-3/4 × 9-1/2 in
Venting4" Category III to 50 equivalent ft; optional direct-vent conversion with 3" intakeIntegral exhaust vent on the front of the outdoor unit
Hot/cold water connections3/4" NPT3/4" NPT
Gas connection3/4" NPT3/4" NPT
Thermal efficiency0.8 %0.8 %
Maximum flow rate10 GPM10 GPM
InstallationIndoorOutdoor
TechnologyNon-condensing tankless water heaterNon-condensing tankless water heater
Manifold capabilityEasy-Link with up to three other T-H3 units; common vent up to 8 unitsEasy-Link with up to three other T-H3 units; common vent up to 8 units

What actually separates them

Published ratings: the Takagi T-D2-IN-P is rated 11,000–199,000 BTU/h input and 0.8% efficiency; the Takagi T-D2-OS-N is rated 11,000–199,000 BTU/h input and 0.8% efficiency. Both list the same published input of 199,000 BTU/h. Both list the same published efficiency of 0.8%.

The venting differs: the Takagi T-D2-IN-P lists 4" Category III to 50 equivalent ft; optional direct-vent conversion with 3" intake, while the Takagi T-D2-OS-N lists Integral exhaust vent on the front of the outdoor unit. The installation differs: the Takagi T-D2-IN-P lists Indoor, while the Takagi T-D2-OS-N lists Outdoor.

Both records print the same input (11,000 BTU/h), input (199,000 BTU/h), shipping weight (45 lb) and dimensions (20-1/4 × 13-3/4 × 9-1/2 in), per the cited sources.

CurrentCanadian status unknown
Input
11000–199000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-D2-IN-P is a non-condensing tankless water heater — a DHW-only appliance, not a boiler — firing 11,000 to 199,000 BTU/h on propane with 0.8% thermal efficiency and up to 10 GPM.

PropaneDHW-only (tankless)
CurrentCanadian status unknown
Input
11000–199000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-D2-OS-N is a non-condensing tankless water heater — a DHW-only appliance, not a boiler — firing 11,000 to 199,000 BTU/h on natural gas with 0.8% thermal efficiency and up to 10 GPM.

Natural gasDHW-only (tankless)

Frequently asked questions

Do the two models share the same input?

Yes — both list 199,000 BTU/h in the cited documentation.

Which model is more efficient?

Both list the same efficiency of 0.8%.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate