Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Takagi T-H3-DV-N vs T-H3S-DV-N

Verdict in brief

The T-H3-DV-N and T-H3S-DV-N are the two largest indoor natural-gas models in Takagi's T-H3 tankless water-heater family: 199,000 against 180,000 BTU/h input, 10.0 against 8.0 GPM maximum flow, and 0.93 against 0.95 UEF. The T-H3 is the extra hot-water capacity; the T-H3S is the higher published efficiency.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Takagi T-H3-DV-N and Takagi T-H3S-DV-N
SpecificationTakagi T-H3-DV-NTakagi T-H3S-DV-N
Input, maximum199,000 BTU/h180,000 BTU/h
Input, minimum15,000 BTU/h15,000 BTU/h
Uniform Energy Factor (UEF)0.93 UEF0.95 UEF
Maximum flow rate10 GPM8 GPM
InstallationIndoor, direct ventIndoor, direct vent
Approx. shipping weight71 lb71 lb
Warranty15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial

What actually separates them

Both models are indoor direct-vent condensing tankless water heaters documented in the same official spec sheet (TRGSS01512). They share the same 23-5/8 × 17-3/4 × 11-1/4 in cabinet, 3/4" NPT water and gas connections, 71 lb shipping weight, Ultra-Low NOx combustion, and the same 15-year residential / 5-year commercial heat-exchanger warranty structure.

The difference is the rating: the T-H3-DV-N fires to 199,000 BTU/h with 10.0 GPM maximum flow, while the T-H3S-DV-N fires to 180,000 BTU/h with 8.0 GPM. The extra capacity in the T-H3 suits larger simultaneous hot-water demand — more fixtures running at once — while the T-H3S is rated one point higher on UEF (0.95 vs 0.93).

Neither is a boiler. If either is used with a hydronic or radiant system, Takagi's official T-H3 page supports that application of the water heater, but a licensed contractor must design and verify the system. Choose between the two on the calculated hot-water demand, not on cabinet size, which is identical.

CurrentCanadian status unknown
Input
15000–199000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3-DV-N is the natural gas indoor 199,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.93 UEF with up to 10 GPM maximum flow.

Natural gasDHW-only (tankless)
CurrentCanadian status unknown
Input
15000–180000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3S-DV-N is the natural gas indoor 180,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.95 UEF with up to 8 GPM maximum flow.

Natural gasDHW-only (tankless)

Frequently asked questions

Which model has the higher efficiency?

The T-H3S-DV-N is rated 0.95 UEF against the T-H3-DV-N's 0.93 UEF, per Takagi's official specification sheet.

How much more flow does the T-H3-DV-N deliver?

Up to 10.0 GPM maximum versus 8.0 GPM on the T-H3S-DV-N, with both figures based on factory testing and 0.4 GPM required for continuous fire after ignition.

Are the two units physically the same size?

Yes. Both share the 23-5/8 × 17-3/4 × 11-1/4 in cabinet and the same 3/4" NPT water and gas connections; the difference is the firing rate and flow rating.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate