Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Takagi T-H3M-DV-P vs Takagi T-H3M-OS-N

Verdict in brief

Both the Takagi T-H3M-DV-P and the Takagi T-H3M-OS-N belong to the Takagi T-H3 Series line of tankless water heaters. Published ratings: Takagi T-H3M-DV-P at 13,000–120,000 BTU/h input and 0.9 UEF; Takagi T-H3M-OS-N at 15,000–120,000 BTU/h input and 0.91 UEF. Both list the same published input of 120,000 BTU/h. Takagi T-H3M-OS-N carries the higher published UEF at 0.91 UEF, against 0.9 UEF.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Takagi T-H3M-DV-P and Takagi T-H3M-OS-N
SpecificationTakagi T-H3M-DV-PTakagi T-H3M-OS-N
Input, minimum13,000 BTU/h15,000 BTU/h
Input, maximum120,000 BTU/h120,000 BTU/h
Dimensions (H × W × D)22-7/8 × 13-7/8 × 10-13/16 in22-7/8 × 13-7/8 × 10-13/16 in
Hot/cold water connections3/4" NPT3/4" NPT
Gas connection1/2" NPT1/2" NPT
Uniform Energy Factor (UEF)0.9 UEF0.91 UEF
Maximum flow rate6.6 GPM6.6 GPM
Approx. shipping weight54 lb52 lb
InstallationIndoor, direct ventOutdoor
TechnologyCondensing tankless water heaterCondensing tankless water heater
Heat exchangerCommercial-grade copper primary + Type 316L stainless-steel secondaryCommercial-grade copper primary + Type 316L stainless-steel secondary
NOxUltra-Low NOx < 14 ng/J (< 20 ppm)Ultra-Low NOx < 14 ng/J (< 20 ppm)
Manifold capabilityEasy-Link up to 4 units; Multi-Link up to 20 units with controllerEasy-Link up to 4 units; Multi-Link up to 20 units with controller
Warranty15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial

What actually separates them

Published ratings: the Takagi T-H3M-DV-P is rated 13,000–120,000 BTU/h input and 0.9 UEF; the Takagi T-H3M-OS-N is rated 15,000–120,000 BTU/h input and 0.91 UEF. Both list the same published input of 120,000 BTU/h. Takagi T-H3M-OS-N carries the higher published UEF at 0.91 UEF, against 0.9 UEF.

The approx. shipping weight differs: the Takagi T-H3M-DV-P lists 54 lb, while the Takagi T-H3M-OS-N lists 52 lb. The installation differs: the Takagi T-H3M-DV-P lists Indoor, direct vent, while the Takagi T-H3M-OS-N lists Outdoor.

Both records print the same input (120,000 BTU/h), dimensions (22-7/8 × 13-7/8 × 10-13/16 in), water connections (3/4" NPT) and gas connection (1/2" NPT), per the cited sources.

CurrentCanadian status unknown
Input
13000–120000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3M-DV-P is the propane indoor 120,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.9 UEF with up to 6.6 GPM maximum flow.

PropaneDHW-only (tankless)
CurrentCanadian status unknown
Input
15000–120000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3M-OS-N is the natural gas outdoor 120,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.91 UEF with up to 6.6 GPM maximum flow.

Natural gasDHW-only (tankless)

Frequently asked questions

Do the two models share the same input?

Yes — both list 120,000 BTU/h in the cited documentation.

Which model is more efficient?

The Takagi T-H3M-OS-N carries the higher published UEF at 0.91 UEF, against 0.9 UEF.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate