Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Takagi T-H3S-DV-N vs T-H3J-DV-N

Verdict in brief

The T-H3S-DV-N and T-H3J-DV-N are adjacent indoor natural-gas sizes in the T-H3 family: 180,000 against 160,000 BTU/h input, 8.0 against 6.6 GPM maximum flow, and the same 0.95 against 0.94 UEF. Both share the same cabinet, connections and warranty.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Takagi T-H3S-DV-N and Takagi T-H3J-DV-N
SpecificationTakagi T-H3S-DV-NTakagi T-H3J-DV-N
Input, maximum180,000 BTU/h160,000 BTU/h
Input, minimum15,000 BTU/h15,000 BTU/h
Uniform Energy Factor (UEF)0.95 UEF0.94 UEF
Maximum flow rate8 GPM6.6 GPM
InstallationIndoor, direct ventIndoor, direct vent
Approx. shipping weight71 lb71 lb
Warranty15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial15-yr limited HX / 5-yr parts residential; 5-yr HX / 5-yr parts commercial

What actually separates them

Both models are documented together in Takagi's official spec sheet TRGSS01512 as indoor direct-vent condensing water heaters. They share the 23-5/8 × 17-3/4 × 11-1/4 in cabinet, 3/4" NPT water and gas connections, 71 lb shipping weight, and the same 15-year residential / 5-year commercial heat-exchanger warranty.

The published differences are small: the T-H3S-DV-N adds 20,000 BTU/h of input and 1.4 GPM of maximum flow over the T-H3J-DV-N, with one point more UEF (0.95 vs 0.94). The T-H3J-DV-N's minimum input is 15,000 BTU/h on natural gas, same as the T-H3S.

For a household or small commercial hot-water load, the choice is a demand calculation: the T-H3J covers most single-family and small commercial loads, while the T-H3S adds headroom for larger simultaneous draws. Neither unit is a boiler, and neither produces space heat unless a contractor designs it into a hydronic application of the water heater.

CurrentCanadian status unknown
Input
15000–180000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3S-DV-N is the natural gas indoor 180,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.95 UEF with up to 8 GPM maximum flow.

Natural gasDHW-only (tankless)
CurrentCanadian status unknown
Input
15000–160000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-H3J-DV-N is the natural gas indoor 160,000 BTU/h condensing tankless water heater in the T-H3 Series — a DHW-only appliance, not a boiler, rated 0.94 UEF with up to 6.6 GPM maximum flow.

Natural gasDHW-only (tankless)

Frequently asked questions

What separates the T-H3S-DV-N from the T-H3J-DV-N?

Twenty thousand BTU/h of input and 1.4 GPM of maximum flow, plus one UEF point (0.95 vs 0.94), per Takagi's specification sheet.

Do both models use the same venting?

Both are indoor direct-vent condensing models on 4" venting with PVC, CPVC, PP or Category III stainless options, per Takagi's T-H3 documentation.

Which one is enough for a small business?

That depends on the fixture count and simultaneous demand, not on floor area. Takagi positions the family for residential/commercial uses such as small restaurants and salons; a licensed contractor should size from the actual hot-water load.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate