Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Takagi T-M50-N vs Takagi T-M50-P

Verdict in brief

The Takagi T-M50-N and Takagi T-M50-P are both tankless water heaters in the Takagi T-M50 Commercial Series line. The Takagi T-M50-N is rated 15,000–380,000 BTU/h input and 80% efficiency, and the Takagi T-M50-P is rated 15,000–380,000 BTU/h input and 82% efficiency. Both list the same published input of 380,000 BTU/h. Takagi T-M50-P lists 2 percentage points more efficiency than Takagi T-M50-N (82% against 80%). Both list the same published shipping weight of 113 lb.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Takagi T-M50-N and Takagi T-M50-P
SpecificationTakagi T-M50-NTakagi T-M50-P
Input, minimum15,000 BTU/h15,000 BTU/h
Input, maximum380,000 BTU/h380,000 BTU/h
Weight113 lb113 lb
Dimensions (H × W × D)25-1/4 × 24-7/8 × 12-3/4 in (H × W × D)25-1/4 × 24-7/8 × 12-3/4 in (H × W × D)
Venting5" Category III stainless steel to 50 ft, 5 elbows max; 5" combustion-air intake with optional kit5" Category III stainless steel to 50 ft, 5 elbows max; 5" combustion-air intake with optional kit
Hot/cold water connections1" NPT1" NPT
Gas connection1" NPT1" NPT
Thermal efficiency80 %82 %
Maximum flow rate14.5 GPM14.5 GPM
InstallationIndoorIndoor
TechnologyNon-condensing tankless water heaterNon-condensing tankless water heater
Manifold capabilityEasy-Link up to 4 units; Multi-Link up to 10 units with TM-MC01 controllerEasy-Link up to 4 units; Multi-Link up to 10 units with TM-MC01 controller

What actually separates them

Published ratings: the Takagi T-M50-N is rated 15,000–380,000 BTU/h input and 80% efficiency; the Takagi T-M50-P is rated 15,000–380,000 BTU/h input and 82% efficiency. Both list the same published input of 380,000 BTU/h. Takagi T-M50-P lists 2 percentage points more efficiency than Takagi T-M50-N (82% against 80%).

Both records print the same input (15,000 BTU/h), input (380,000 BTU/h), shipping weight (113 lb) and dimensions (25-1/4 × 24-7/8 × 12-3/4 in (H × W × D)), per the cited sources.

CurrentCanadian status unknown
Input
15000–380000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-M50-N is a non-condensing tankless water heater — a DHW-only appliance, not a boiler — firing 15,000 to 380,000 BTU/h on natural gas with 80% thermal efficiency and up to 14.5 GPM.

Natural gasDHW-only (tankless)
CurrentCanadian status unknown
Input
15000–380000 BTU/h
Output (max)
—
AFUE
—

The Takagi T-M50-P is a non-condensing tankless water heater — a DHW-only appliance, not a boiler — firing 15,000 to 380,000 BTU/h on propane with 82% thermal efficiency and up to 14.5 GPM.

PropaneDHW-only (tankless)

Frequently asked questions

Do the two models share the same input?

Yes — both list 380,000 BTU/h in the cited documentation.

Which model is more efficient?

The Takagi T-M50-P carries the higher published efficiency at 82%, against 80%.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate