Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Utica PEG112EID vs PEG150EID

Verdict in brief

The PEG112EID and PEG150EID are adjacent sizes in the current PEG-E gas-fired cast-iron STEAM line — both non-condensing atmospheric boilers with a rear-mounted integral draft hood, probe-type LWCO and pressure controls, rated at 82.4% and 82.6% AFUE. The PEG150EID fires 150 MBH against 112 MBH, printing 94 MBH of net steam (70) over 391 sq ft (292), with 5 cast-iron sections against 4; piping risers change from 2" (single) to (2) 2", the vent pipe steps from 5" to 6" and a shipping weight of 440 lb against 368 lb.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Utica PEG112EID and Utica PEG150EID
SpecificationUtica PEG112EIDUtica PEG150EID
Input112 MBH150 MBH
Heating capacity93 MBH125 MBH
Net AHRI steam rating70 MBH94 MBH
Steam radiation292 sq ft391 sq ft
AFUE82.4 %82.6 %
Cast-iron sections45
Vent pipe size5"6"
Piping risers2" (single)(2) 2"
Dimensions (W x H x D)14⅛ × 35⅞ × 28⅜17⅜ × 35⅞ × 29⅜
Shipping weight368 lb440 lb

What actually separates them

Both models are PEG-E gas-fired cast-iron steam boilers — non-condensing, atmospheric chimney venting through a rear-mounted integral draft hood and vent damper, with cast-iron push nipples, stainless steel burners, and a probe-type low water cut-off with pressure high-limit control, pressure gauge and gauge glass. Neither modulates: input is fixed.

The sell-sheet ratings table prints 112 MBH input, 93 MBH heating capacity, 70 MBH net steam over 292 sq ft and 82.4% AFUE on the PEG112EID, against 150 MBH, 125 MBH, 94 MBH over 391 sq ft and 82.6% on the PEG150EID. Net steam ratings use a piping and pickup allowance of 1.333.

The physical step changes the near-boiler piping: piping risers change from 2" (single) to (2) 2", the vent pipe steps from 5" to 6", both take ½" NPT gas, and cabinet dimensions move from 14⅛ × 35⅞ × 28⅜ in to 17⅜ × 35⅞ × 29⅜ in with shipping weight from 368 to 440 lb. Steam sizing starts from the connected radiation load, so the heat-loss and radiation survey decides between the two — installation belongs with a licensed contractor.

Utica Boilers

Utica PEG112EID

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
82.4 %

The Utica PEG112EID is a gas-fired cast-iron steam boiler: 112 MBH input, 93 MBH heating capacity, 70 MBH net steam and 292 sq ft at 82.4% AFUE, with 4 sections, a 5" vent and 2" (single) piping risers. It is tagged 'Current' on Utica's Gas Boilers category page.

Natural gasPropaneHeating-only

Utica Boilers

Utica PEG150EID

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
82.6 %

The Utica PEG150EID is a gas-fired cast-iron steam boiler: 150 MBH input, 125 MBH heating capacity, 94 MBH net steam and 391 sq ft at 82.6% AFUE, with 5 sections, a 6" vent and (2) 2" piping risers. It is tagged 'Current' on Utica's Gas Boilers category page.

Natural gasPropaneHeating-only

Frequently asked questions

What does the PEG150EID add over the PEG112EID?

150 MBH input against 112 MBH, 94 MBH net steam over 391 sq ft against 70 MBH over 292 sq ft, and 5 sections against 4, per the official PEG-E sell sheet.

How do the piping risers differ?

PEG112EID: 2" (single); PEG150EID: (2) 2", per the IOM near-boiler piping figures. The product page describes single and dual piping riser options depending on boiler size.

Are both boilers condensing?

No — every PEG-E is a non-condensing cast-iron steam boiler with atmospheric chimney venting, an integral draft hood and a vent damper.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate