Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Utica PEG150EID vs PEG187EID

Verdict in brief

The PEG150EID and PEG187EID are adjacent sizes in the current PEG-E gas-fired cast-iron STEAM line — both non-condensing atmospheric boilers with a rear-mounted integral draft hood, probe-type LWCO and pressure controls, rated at 82.6% and 82.8% AFUE. The PEG187EID fires 187 MBH against 150 MBH, printing 117 MBH of net steam (94) over 488 sq ft (391), with 6 cast-iron sections against 5; both use (2) 2" piping risers, the vent pipe steps from 6" to 7" and a shipping weight of 512 lb against 440 lb.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Utica PEG150EID and Utica PEG187EID
SpecificationUtica PEG150EIDUtica PEG187EID
Input150 MBH187 MBH
Heating capacity125 MBH156 MBH
Net AHRI steam rating94 MBH117 MBH
Steam radiation391 sq ft488 sq ft
AFUE82.6 %82.8 %
Cast-iron sections56
Vent pipe size6"7"
Piping risers(2) 2"(2) 2"
Dimensions (W x H x D)17⅜ × 35⅞ × 29⅜20⅝ × 35⅞ × 30⅜
Shipping weight440 lb512 lb

What actually separates them

Both models are PEG-E gas-fired cast-iron steam boilers — non-condensing, atmospheric chimney venting through a rear-mounted integral draft hood and vent damper, with cast-iron push nipples, stainless steel burners, and a probe-type low water cut-off with pressure high-limit control, pressure gauge and gauge glass. Neither modulates: input is fixed.

The sell-sheet ratings table prints 150 MBH input, 125 MBH heating capacity, 94 MBH net steam over 391 sq ft and 82.6% AFUE on the PEG150EID, against 187 MBH, 156 MBH, 117 MBH over 488 sq ft and 82.8% on the PEG187EID. Net steam ratings use a piping and pickup allowance of 1.333.

The physical step changes the near-boiler piping: both use (2) 2" piping risers, the vent pipe steps from 6" to 7", gas steps from ½" NPT to ¾" NPT, and cabinet dimensions move from 17⅜ × 35⅞ × 29⅜ in to 20⅝ × 35⅞ × 30⅜ in with shipping weight from 440 to 512 lb. Steam sizing starts from the connected radiation load, so the heat-loss and radiation survey decides between the two — installation belongs with a licensed contractor.

Utica Boilers

Utica PEG150EID

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
82.6 %

The Utica PEG150EID is a gas-fired cast-iron steam boiler: 150 MBH input, 125 MBH heating capacity, 94 MBH net steam and 391 sq ft at 82.6% AFUE, with 5 sections, a 6" vent and (2) 2" piping risers. It is tagged 'Current' on Utica's Gas Boilers category page.

Natural gasPropaneHeating-only

Utica Boilers

Utica PEG187EID

CurrentCanadian status unknown
Input
—
Output (max)
—
AFUE
82.8 %

The Utica PEG187EID is a gas-fired cast-iron steam boiler: 187 MBH input, 156 MBH heating capacity, 117 MBH net steam and 488 sq ft at 82.8% AFUE, with 6 sections, a 7" vent and (2) 2" piping risers. It is tagged 'Current' on Utica's Gas Boilers category page.

Natural gasPropaneHeating-only

Frequently asked questions

What does the PEG187EID add over the PEG150EID?

187 MBH input against 150 MBH, 117 MBH net steam over 488 sq ft against 94 MBH over 391 sq ft, and 6 sections against 5, per the official PEG-E sell sheet.

How do the piping risers differ?

PEG150EID: (2) 2"; PEG187EID: (2) 2", per the IOM near-boiler piping figures. The product page describes single and dual piping riser options depending on boiler size.

Are both boilers condensing?

No — every PEG-E is a non-condensing cast-iron steam boiler with atmospheric chimney venting, an integral draft hood and a vent damper.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate