Skip to content
Boilers.caby ROMA Heating & Cooling

Bosch Thermotechnology · Buderus Stainless Steel Boiler (SSB)

Buderus SSB1000TL2 (Gen 2)

The Buderus SSB1000TL2 (Gen 2) is a factory-cascaded commercial condensing boiler combining 2 SSB1000TL modules: 2,048 MBH maximum input, 20:1 turndown, 96.8% AHRI thermal efficiency and 1,982 MBH gross output at 1,698 lb dry weight.

CurrentSold in Canada

Key figures

Max input
2,048 MBH
Max CSA output
AFUE
Min input
100 MBH
Natural gasPropaneHeating-onlycommercial

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Buderus SSB1000TL2 (Gen 2) in practice

Best suited to

    Applicability and support

    Model number
    SSB1000TL2
    Canadian availability
    available
    Production status
    current
    ROMA supplies
    Confirmed at consultation
    ROMA services
    Confirmed at consultation
    Warranty
    Series terms

    Where ROMA provides on-site service

    On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

    See all service areas

    Specifications

    Published specifications

    Values as published by Bosch Thermotechnology. Units are shown with every value; notes flag conflicting sources or missing figures.

    Buderus SSB1000TL2 (Gen 2) specifications
    SpecificationValueNote
    Input
    Input, maximum2,048 MBH2,048,000 BTU/hr (600 kW class per sheet); AHRI certified.
    Input, minimum100 MBH100,000 BTU/hr.
    Output
    Gross output (AHRI)1,982 MBH1,982,000 BTU/hr.
    Net rating (AHRI)1,723.4 MBH1,723,400 BTU/hr.
    Efficiency
    Combustion efficiency (AHRI)95.4 %
    Thermal efficiency (AHRI)96.8 %Printed for every SSB size and cascade column in the submittal sheet.
    Venting and air
    Vent/air intake connections10" (254 mm)Twin-pipe or single (concentric or single-pipe) termination, vertical or horizontal.
    Physical and connections
    Water volume40 gal151 l.
    Weight, dry1,698 lb770 kg.
    Shipping weight1,882 lb854 kg.
    Dimensions (L × W × H)31.5 × 71.9 × 70.9 in (800 × 1825 × 1800 mm)Per the engineering submittal sheet dimension drawings.
    Surface heat exchanger (total)172 sq ft (16.0 m²)
    Maximum allowable working pressure (MAWP)80 psi80 psig per ASME Section IV; each module carries a 75 lb pressure relief valve.
    Maximum operating temperature194 °F90 °C.
    Maximum heat-exchanger temperature210 °F98.9 °C.
    Electrical
    Electrical requirement30.2 FLA120 VAC / 1 phase / 60 Hz; maximum current drawn if all pumps reach rated horsepower.
    Operating limits and other
    Turndown20:12 SSB1000TL modules combined; the cascade submittal sheet rates 20:1 turndown.
    Heat exchangerDual 441 stainless steel heat exchanger modulesGen 2 uses two plasma-welded 441 dual-tube stainless steel modules with independent fan, gas valve, burner tube and circulator per module.
    Gas connection3" flanged
    Water connections5"System supply and return; flanged on the 5" connection.
    FuelNatural gas or propaneFactory set for natural gas; field-convertible to LP with the supplied conversion kit.

    Questions about the Buderus SSB1000TL2 (Gen 2)?

    Describe what the boiler is doing and get a straight answer about the next step.

    On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

    Sources and verification

    Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

    CallEmailEstimate