Skip to content
Boilers.caby ROMA Heating & Cooling

HTP · Error codes

HTP Versa-Hydro E19 — Line Voltage Frequency Out of Range

E19

Needs attentionHTP Versa-Hydro combi units (926 SIT control, manual LP-314)

Line voltage frequency out of range. The line voltage frequency is out of range - this can happen when the unit is powered from a small gasoline-powered generator that is overloaded or not functioning correctly. Inspect power wiring to the unit and repair as necessary; if connected to line voltage notify the electric utility; if connected to an alternate power source such as a generator or inverter, make sure the line voltage frequency supplied is 60 Hz. The table classifies it as Error (Auto Reset).

Applies to

This communication or network fault code is displayed by the 926 SIT control on Versa-Hydro models (PHE130/PHE199), as documented in Versa-Hydro Installation Manual, LP-314 Rev. 012 Rel. 007 (12.8.21), Table 21 (LP-314). Codes can differ between controller generations, so always check the manual that matches your unit.

Controller: 926 SIT control. Source manual: LP-314.

Why a code is not a diagnosis

A communication code involves the link between controls (cascade, remote, sensors on a bus). Another unit being off, a wiring fault or an address conflict can all produce it.

Safe things to observe

  • Check that every appliance in a multi-unit plant has power.
  • Report the code together with any other codes on the system.

Do not

  • Do not re-address or rewire control networks yourself.

How professional service helps

  1. A technician verifies power, wiring and settings across the connected units.
  2. Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Frequently asked questions

Can I clear this code myself?

Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.

Boiler locked out? Call with the alert text ready.

The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 8, 2026. Last updated September 8, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate