Smith Cast Iron Boilers service
Smith Cast Iron Boilers: heat-loss assessment: size the truth, not the square footage
A room-by-room heat-loss assessment for Greater Vancouver homes and buildings that estimates the heat required on a cold design day, so boiler decisions are built on measured facts about the envelope rather than floor area.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Heat-Loss Assessment for Smith Cast Iron Boilers boilers
Heat moves out through walls, windows, roofs and air leaks, and the rate depends on the building, not on its floor area. A heat-loss assessment walks the property, records the construction and openings room by room, and estimates how much heat each space needs on a design day for the local climate. It is the starting number behind honest boiler sizing.
Assessments are not only for whole-building boiler projects. They help when a room stays cold, when an addition or suite extends the system, when radiators or in-floor loops are being changed, and when a quoted boiler size looks wrong. The written result gives each room a required output, so the design step that follows has something real to work from.
Working on a Smith Cast Iron Boilers boiler? Have the model name and any alert text ready. Browse Smith Cast Iron Boilers series, models and error codes to find yours; the details carry through when you request service.
What's included
- Site walkthrough with measurement of rooms, walls, windows, doors and roof construction
- Review of insulation, glazing type, orientation and notable air-leakage characteristics
- Per-room and whole-building heat-loss estimate using standard engineering method
- Comparison against existing emitters where applicable
- A written assessment you can hand to a designer, engineer or installer
Not included
- Selection or specification of a boiler model (follows from the assessment)
- Blower-door or other air-tightness testing
- Structural or building-science consulting
Process
How it works
- 01
Book the assessment
It can stand alone or lead into a sizing, selection or installation project.
- 02
Site measurement
Rooms, construction details and existing emitters are documented on site.
- 03
Calculation and report
Required outputs per room and for the building are written up with assumptions stated.
- 04
Hand over
The results are explained and carried into sizing or a proposal if you proceed.
Why ROMA
4.8★
4.8★ from 221+ Google reviews
As published by ROMA Heating & Cooling on romaheating.ca, checked September 8, 2026.
Technical Safety BC licensed gas contractor
Gas licence LGA0202903, as published by ROMA.
Source: romaheating.ca
Licensed, bonded and insured
Technicians are bonded, insured and Red Seal-trained, as published by ROMA.
Source: romaheating.ca
Upfront flat-rate pricing
ROMA publishes that pricing is approved before work starts, with no hidden fees.
Source: romaheating.ca
Authorized for 30+ brands
ROMA states it is authorized for brands including Lennox, Carrier, Viessmann, Navien and Rheem.
Source: romaheating.ca
Frequently asked questions
Is a heat-loss assessment the same as boiler sizing?
No. The assessment establishes how much heat the building needs; sizing turns that into a specific boiler capacity and firing range. Boilers.ca offers them as separate services, usually in that order.
Do I need one to replace my boiler?
Properly sized replacements start from a load calculation. A like-for-like swap of a boiler that was correctly sized may not need one, but the assessment is the way to catch a system that has always been undersized or oversized.
Who performs the calculation?
A ROMA technician with hydronic system experience performs the assessment and documents the assumptions, so the result can be reviewed rather than treated as a black box.
Book a consultation
A technician reviews your building and options. Requests are confirmed by ROMA.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Related services and help
- Boiler SizingBoiler sizing in Greater Vancouver turns a heat-loss figure into the right boile…
- Boiler SelectionStructured boiler selection advice for Greater Vancouver homeowners, strata coun…
- Boiler ConsultationA boiler consultation with ROMA Heating & Cooling covers repair versus replaceme…
- Boiler RetrofitRetrofit services in Greater Vancouver adapt existing hydronic systems for a mod…
- Look up an error codeDocumented meanings by brand and controller
- Buying guideCondensing boilers, sizing and hot water
Sources and verification
- Editorial content by Boilers.ca; no external technical claims.
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.