Skip to content
Boilers.caby ROMA Heating & Cooling

Utica Boilers · Oneida (CO/CH)

Utica Oneida CO-200

The Oneida CO-200 is Utica's 200 MBH-class wall-hung residential combi: 20 to 180 MBH central-heating input with DHW input from 20 to 200 MBH (5.1 GPM at a 70 °F rise), 95.2% AFUE, 167 MBH heating capacity and up to 10:1 turndown.

CurrentCanadian status unknown

Key figures

Max input
180 MBH
Max CSA output
—
AFUE
95.2 %
Min input
20 MBH
Natural gasPropaneCombiresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Utica Oneida CO-200 in practice

The Oneida CO-200 is the 200 MBH-class combi of Utica's current Oneida CO residential line — the official page describes the CO (Combi) models as three sizes from 80,000 to 200,000 BTU/hr input producing domestic hot water alongside central heating, removing the separate water heater. The brochure table prints 20 to 180 MBH central-heating input with DHW input of 20 to 200 MBH and 5.1 GPM of DHW flow at a 70 °F rise, at 95.2% AFUE with 167 MBH heating capacity and a 145 MBH net AHRI water rating.

It is a wall-hung condensing design on the next-generation enhanced stainless steel water-tube heat exchanger with up to 10:1 turndown, direct-vent Category IV twin-pipe venting (the included 3-in-1 adjustable vent connector accepts PVC, CPVC, polypropylene or stainless steel; flue 3" with a 2" reducer) and CH supply/return at 3/4" NPT with 1/2" NPT DHW connections and 3/4" NPT gas. All residential Oneida sizes share the 28.2" x 17.4" x 16.9" wall-hung cabinet at 74–101 lb.

Utica prices the residential Oneida line for homes rather than plant rooms: ENERGY STAR certified at 95.2% AFUE with cascade control to 16 boilers, a control display settable to 18 languages, and a 10-year heat exchanger / 5-year parts limited warranty (residential). Ratings on this record are the US-market figures Utica prints; Boilers.ca found no official Canadian rating listings, so canadianStatus stays 'unknown'. Gas work belongs with a licensed contractor against the residential IOM (E93.1907.035.915.C).

Best suited to

  • Homes whose heat-loss calculation and hot-water draws fit the 200 MBH-class combi
  • Households replacing a boiler plus separate hot-water tank with one wall-hung appliance
  • Wall-hung installations on the shared 28.2 x 17.4 x 16.9 in Oneida cabinet

Applicability and support

Model number
CO-200
Canadian availability
unknown
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Series terms

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Utica Boilers. Units are shown with every value; notes flag conflicting sources or missing figures.

Utica Oneida CO-200 specifications
SpecificationValueNote
Input
Central-heating input, minimum20 MBHCH input minimum in MBH as printed in the official brochure table.
Central-heating input, maximum180 MBHCH input maximum in MBH as printed in the official brochure table.
Output
Heating capacity167 MBHHeating capacity in MBH as printed in the official brochure table.
Net AHRI water rating145 MBHNet AHRI water rating in MBH as printed in the official brochure table.
Efficiency
AFUE95.2 %95.2% AFUE as printed for the residential models in the official brochure table and on the product pages.
Domestic hot water
DHW input, minimum20 MBHDHW input minimum in MBH as printed in the official brochure table.
DHW input, maximum200 MBHDHW input maximum in MBH as printed in the official brochure table.
DHW flow rate at 70 °F rise5.1 gpmDomestic hot water flow at a 70 °F temperature rise as printed in the official brochure table.
Venting and air
VentingTwin-pipe direct vent, Category IV, with the included 3-in-1 adjustable vent connectorVenting approved in PVC, CPVC, polypropylene and stainless steel; flue 3" (2" with reducer) per the residential brochure. Gas work belongs with a licensed contractor.
Physical and connections
Gas supply pressureNatural gas 3.5"–10.5" w.c. (nominal 7.0"); LP 8.0"–13.0" w.c. (nominal 11.0")Per Table 4.1 of the residential IOM.
Dimensions (H x W x D)28.2" x 17.4" x 16.9"All residential Oneida sizes share the same wall-hung cabinet, per the official brochure.
Weight74–101 lb across the residential rangeThe official brochure prints the 74–101 lb range across the residential models, which share one wall-hung cabinet; the product page summarizes the design as under 101 lb.
Heat exchangerStainless steel water-tube heat exchangerNext-generation enhanced stainless steel water-tube heat exchanger, as printed on the official pages.
Electrical
Power supply120 V / 60 HzPer the residential specification sheets.
Operating limits and other
ConnectionsCH supply/return 3/4" NPT; DHW supply/return 1/2" NPT; gas 3/4" NPTWall-hung residential connection sizes per the official brochure.
FuelNatural gas or propaneNatural gas is the factory configuration; the official pages state the boiler is easily converted to propane (LP).
TurndownUp to 10:1Up to 10:1 turndown as printed on the official product pages.
Warranty10-year heat exchanger limited warranty and 5-year parts limited warranty (residential)As printed on the official Oneida CO and CH residential product pages.

Frequently asked questions

Is the Oneida CO-200 a combi boiler?

Yes — the CO models combine central heating with on-demand domestic hot water (DHW input 20 to 200 MBH, up to 5.1 GPM at a 70 °F rise), removing the separate water heater.

What is the Oneida CO-200's efficiency rating?

95.2% AFUE, as printed for every residential Oneida model in the official brochure table and on the product pages.

Where does the CO-200 sit in the Oneida CO range?

It is the 200 MBH-class size: central heating runs 20 to 180 MBH input and DHW 20 to 200 MBH, above the smaller CO sizes and below the CO-200.

Questions about the Utica Oneida CO-200?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 8, 2026. Last updated September 8, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate