Viessmann Vitocrossal 300 C7 — Control Mode, Max. Pump Speed
C7
Control mode, max. pump speed. There is a communication fault with the variable speed circulation pump of the heating circuit without mixing valve (heating circuit pump A1); check the setting of coding address E5.
Applies to
This domestic hot water fault code is displayed by the Vitotronic 200 control (CU3A) on Vitocrossal 300 CU3A models (CU3A-94, CU3A-125, CU3A-160, CU3A-199), as documented in Vitocrossal 300 CU3A Service Instructions, doc 5673 649 - 20, 03/2025 (5673 649 - 20). Codes can differ between controller generations, so always check the manual that matches your unit.
- Viessmann Vitocrossal 300 (CU3A)
- Viessmann Vitocrossal 300 CU3A-94
- Viessmann Vitocrossal 300 CU3A-125
- Viessmann Vitocrossal 300 CU3A-160
- Viessmann Vitocrossal 300 CU3A-199
Controller: Vitotronic 200 control (CU3A). Source manual: 5673 649 - 20 (2025-03).
Why a code is not a diagnosis
A DHW code involves the hot-water side: sensors, flow, the mixing/bypass valve or the DHW heat exchanger. It does not say whether the fix is a sensor, a valve or a flush.
Safe things to observe
- Note the code and whether the problem follows a hot-water draw or appears at all times.
Do not
- Do not open the appliance to test DHW components yourself.
How professional service helps
- A technician tests the DHW sensors, flow switch and valve circuits, and cleans the DHW path where the manual directs.
- Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Circulator pump
The circulator is the pump that moves heated water from a boiler out to the radiators, baseboards or in-floor loops and back again.
What a technician checks →Mixing valve (system temperature)
A mixing valve blends hot boiler water with cooler water so one boiler can serve parts of a system at different temperatures — warm floors,…
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for Viessmann Vitocrossal 300 (CU3A).
Frequently asked questions
Can I clear this code myself?
Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Vitocrossal 300 CU3A Service Instructions, doc 5673 649 - 20, 03/2025 · 5673 649 - 20 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.