Viessmann · Vitocrossal (legacy CA3/CT3 and earlier CM2 generations)
Viessmann Vitocrossal 300 CT3-17
The Vitocrossal 300 CT3-17 is the smallest CT3 commercial condensing boiler: 638 MBH input (187 kW), 626 MBH output, 98.3% combustion and 98.1% thermal efficiency at 30 psig.
Key figures
- Max input
- —
- Max CSA output
- —
- AFUE
- —
- Min input
- —
Input is gas energy consumed; output is heat delivered. Never size from input alone.
Viessmann Vitocrossal 300 CT3-17 in practice
The CT3-17 is a gas-fired floor-standing commercial condensing boiler with vertical Inox-Crossal stainless steel heating surfaces, rated 638 MBH (187 kW) input and 626 MBH (183 kW) output. It prints 98.3% combustion efficiency and 98.1% thermal efficiency — the highest figures in the CT3 range — and operates at up to 210°F (99°C) with a 30 psig maximum operating pressure.
The boiler shell weighs 1,012 lb (459 kg) and the complete unit 1,228 lb (557 kg) with insulation and control but less burner; it holds 71.3 USG (270 L) of boiler water. As shipped with the door removed it measures 1,516 x 684 x 1,773 mm (59¾ x 27 x 69⅞ in), and it uses an 8 in. (201 mm) internal vent pipe.
Best suited to
- Existing CT3-17 installations needing printed ratings
- Commercial condensing loads from 638 MBH with the highest CT3 efficiency
- Documentation for the entry CT3 size
Applicability and support
- Model number
- CT3-17
- Canadian availability
- historical
- Production status
- discontinued
- ROMA supplies
- Confirmed at consultation
- ROMA services
- Confirmed at consultation
- Warranty
- Not verified
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Specifications
Published specifications
Values as published by Viessmann. Units are shown with every value; notes flag conflicting sources or missing figures.
| Specification | Value | Note |
|---|---|---|
| Input | ||
| Input | 638 MBH | 187 kW, per the technical data manual |
| Output | ||
| Output | 626 MBH | 183 kW; tested to AHRI BTS-2000. |
| Efficiency | ||
| Combustion efficiency | 98.3 % | Per the printed rating table. |
| Thermal efficiency | 98.1 % | Per the printed rating table. |
| Venting and air | ||
| Vent pipe internal diameter | 8 in | 201 mm per the technical data manual. |
| Physical and connections | ||
| Weight, boiler shell | 1,012 lb | 459 kg |
| Overall weight (with insulation and control, less burner) | 1,228 lb | 557 kg |
| Boiler length as shipped (door removed) | 1,516 mm | Printed as 59¾ in |
| Width 1 (maximum shell width) | 684 mm | Printed as 27 in |
| Maximum height | 1,773 mm | Printed as 69⅞ in |
| Operating limits and other | ||
| Fuel | Natural gas or liquid propane | Gas-fired condensing boiler; maximum supply temperature 210°F (99°C). |
| Boiler water content | 71.3 USG | Per the technical data manual. |
| Maximum operating pressure | 30 psig | 207 kPa; maximum operating temperature 210°F (99°C). |
| Boiler supply / return | Per model | Supply and return connections 2½ to 5 in. depending on size; boiler drain 1 in. |
Manuals
- Technical Data Manual — Vitocrossal 300 CT3 Series, doc 5285 871 - 055285 871 - 05 · 2016-01
- Installation Instructions — Vitocrossal 300 CT3, rev 0303 · 2015-10
- Service Instructions — Vitocrossal 300 CT3, rev 0404 · 2016-01
- Operating Instructions — Vitocrossal 300 CT3, rev 0202 · 2015-10
Alerts documented for this model
None documented yet.
Frequently asked questions
What is the CT3-17 rated at?
638 MBH (187 kW) input and 626 MBH (183 kW) output, with 98.3% combustion efficiency and 98.1% thermal efficiency per the technical data manual.
Is the CT3-17 a condensing boiler?
Yes. The Vitocrossal 300 CT3 is a gas-fired condensing boiler with vertical Inox-Crossal stainless steel heating surfaces, for operation without a low limit on boiler return water temperature.
What pressure does the CT3-17 operate at?
A maximum operating pressure of 30 psig (207 kPa) and a maximum supply temperature of 210°F (99°C).
Questions about the Viessmann Vitocrossal 300 CT3-17?
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Compare and explore
- Viessmann Vitocrossal 300 CT3-17 vs CT3-22Comparison
- Viessmann Vitocrossal 300 CT3-22Same series
- Viessmann Vitocrossal 300 CT3-28Same series
- Viessmann Vitocrossal 300 CT3-37Same series
- Viessmann Vitocrossal 300 CT3-46Same series
- Viessmann Vitocrossal 300 CT3-57Same series
- Viessmann Vitocrossal 300 CT3-72Same series
- Viessmann Vitocrossal 300 CT3-89Same series
- Vitocrossal (legacy CA3/CT3 and earlier CM2 generations) series hub
- Buying guide
Sources and verification
- Technical Data Manual — Vitocrossal 300 CT3 Series, doc 5285 871 - 05 · 5285 871 - 05 · accessed September 9, 2026
- Viessmann Canada — Historic manuals · accessed September 9, 2026
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.