Skip to content
Boilers.caby ROMA Heating & Cooling

Viessmann · Series

Viessmann Vitodens 222-F (B2TA)

The Vitodens 222-F B2TA is the earlier floor-standing storage combi-boiler generation that preceded the B2TB: two Canadian sizes, 19 and 35, from 12 to 125 MBH input at 93.3% AFUE, each with an integrated 26.5 USG (100 L) DHW tank. Viessmann Canada keeps its technical data, installation and service documents in the historic manuals library.

discontinuedhistoricalNatural gasPropaneresidential

Series facts

Type
combi
Efficiency
93.3% AFUE
Fuel
Natural gas or liquid propane gas, as printed in the technical data manual's combined NG/LPG input row.
Venting
Direct-vent, room air independent or room air dependent operation; the technical data manual states the 222-F B2TA must not be common-vented with any other appliance.
Models documented
2

93.3% AFUE on both B2TA models per the technical data manual.

About the Vitodens 222-F (B2TA)

The Vitodens 222-F B2TA is a gas-fired floor-mounted condensing combi-boiler with a modulating MatriX cylinder burner and an integrated stainless steel DHW tank — space heating plus stored domestic hot water in one cabinet. Two Canadian sizes were published: 222-F B2TA 19, with a 12-67 MBH (3.5-20 kW) NG/LPG input range and a 53 MBH Net AHRI rating, and 222-F B2TA 35, with 19-125 MBH (5.5-37 kW) and a 99 MBH Net AHRI rating. Both print 93.3% AFUE and weigh 282 lb (128 kg).

Each model carries a 26.5 USG (100 L) DHW storage tank with a 150 psig maximum allowable potable-water pressure. The technical data manual prints a continuous DHW draw of 1.8 USG/min on the 19 and 3.3 USG/min on the 35 at a 70°F rise, with a maximum 10-minute draw of 44 and 60 USG respectively, and standby losses of 4,435 BTU/24h on both.

The B2TA generation was replaced by the B2TB, which Viessmann Canada has since discontinued in Canada; its documentation lives under the historic manuals downloads. Boilers.ca records both B2TA sizes from the printed technical data so owners of existing units can match inputs, DHW figures and dimensions (23.4 x 23.6 x 64 in / 595 x 600 x 1625 mm) to the unit on site.

Highlights

  • Earlier floor-standing storage combi generation, superseded by the Vitodens 222-F B2TB
  • Two Canadian sizes: B2TA 19 and B2TA 35
  • 93.3% AFUE on both; printed NG/LPG input 12-67 and 19-125 MBH
  • Integrated 26.5 USG (100 L) stainless steel DHW tank in both sizes
  • Continuous DHW draw 1.8 USG/min (19) and 3.3 USG/min (35) at a 70°F rise
  • Technical data, installation and service documents in Viessmann Canada's historic manuals

Viessmann Canada publishes a Standard Limited Warranty (doc 6167 816 - 07) for Vitodens units bought on or after June 1, 2021: the pressure vessel is covered 100% for ten years, then under the residential 'limited lifetime' terms on a prorated scale; covered parts carry a two-year term.

Models

Vitodens 222-F (B2TA) models

One canonical page per model with input, output and efficiency kept separate.

DiscontinuedHistorically in Canada
Input
12–67 MBH
Output (max)
—
AFUE
93.3 %

The Vitodens 222-F B2TA 19 is the smaller of the two earlier-generation 222-F combis: 12 to 67 MBH NG/LPG input at 93.3% AFUE with an integrated 26.5 USG (100 L) DHW tank and a 1.8 USG/min continuous draw at a 70°F rise.

Natural gasPropaneCombi
DiscontinuedHistorically in Canada
Input
19–125 MBH
Output (max)
—
AFUE
93.3 %

The Vitodens 222-F B2TA 35 is the larger of the two earlier-generation 222-F combis: 19 to 125 MBH NG/LPG input at 93.3% AFUE with an integrated 26.5 USG (100 L) DHW tank and a 3.3 USG/min continuous draw at a 70°F rise.

Natural gasPropaneCombi

Compare models in this series

Comparison of Viessmann Vitodens 222-F B2TA 19 and Viessmann Vitodens 222-F B2TA 35
SpecificationViessmann Vitodens 222-F B2TA 19Viessmann Vitodens 222-F B2TA 35
CSA input, minimum (NG/LPG)12 MBH19 MBH
CSA input, maximum (NG/LPG)67 MBH125 MBH
output-max——
Efficiency (AFUE)93.3 %93.3 %
turndown——
vent-max-3——
vent-max-2——
Weight282 lb282 lb

Read the full comparison: Viessmann Vitodens 222-F B2TA 19 vs B2TA 35 →

Read the full comparison: Viessmann Vitodens 222-F B2TA 35 vs B2TB-125 →

Error codes and alerts

Vitodens 222-F (B2TA) alerts

No alerts documented for this series yet.

Manuals

Official documents

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Frequently asked questions

What is the difference between the Vitodens 222-F B2TA and B2TB?

The B2TA is the earlier generation, with models 19 and 35 rated 12-67 and 19-125 MBH at 93.3% AFUE. The B2TB that followed has a single Canadian model, the B2TB-125, at 95% AFUE — and the B2TB has since been discontinued in Canada as well.

How much hot water does the B2TA store and deliver?

Both sizes have an integrated 26.5 USG (100 L) DHW tank. The technical data manual prints a continuous draw of 1.8 USG/min on the B2TA 19 and 3.3 USG/min on the B2TA 35 at a 70°F temperature rise, with maximum 10-minute draws of 44 and 60 USG.

Where can I find B2TA manuals?

Viessmann Canada keeps the Vitodens 222-F B2TA technical data manual (doc 5683 719 - 09), installation instructions and service instructions in its historic manuals downloads; the direct PDF links are cited on this record.

Talk to a boiler technician

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate