Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Rinnai IP090S vs IP120S

Verdict in brief

Moving from the IP090S to the IP120S raises the heating ceiling from 90 to 120 MBH and changes the internal hardware: the 120 model moves to the 10.9 sq ft heat exchanger with 0.88 gal of water at 64.8 lb per the manual, against 62.6 lb and 0.75 gal on the 90 — while venting and connections stay identical.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Rinnai IP090S and Rinnai IP120S
SpecificationRinnai IP090SRinnai IP120S
Heating input, minimum15 MBH15 MBH
Heating input, maximum90 MBH120 MBH
Efficiency (AFUE)96 %96 %
Weight62.6 lb64.8 lb
Water content (CH)0.75 gal0.88 gal
Max. equivalent vent length, 2"75 ft75 ft
Max. equivalent vent length, 3"160 ft160 ft

What actually separates them

The IP090S and IP120S bracket the middle of the solo range. Both share the small chassis, the 15 MBH minimum fire, the uniform 75 ft 2" / 160 ft 3" venting and the same 1" NPT heating connections with no DHW side.

The step up brings real hardware: per the manual the IP120S uses the 10.9 sq ft heat exchanger (against 9.3 on the 90), holds 0.88 gal of CH water (against 0.75) and weighs 64.8 lb (against 62.6). The IP120S product page prints 112.4 lb, which matches the large 175k+ solos' manual weight and is treated as a page copy error.

Both boilers manage an indirect tank with recovery priority by default, and efficiency is the family marketing claim of up to 96% AFUE. The 120 model's higher minimum hardware exists to serve a genuinely larger heating load.

CurrentSold in Canada
Input
15–90 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP090S is the mid-size I-Series+ solo: a heating-only condensing boiler firing 15 to 90 MBH of input at the same 62.6 lb and small-chassis footprint as the IP060S, with hot water via an indirect tank.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
15–120 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP120S steps the heating-only solo line up to 120 MBH of input (15-120 MBH) on the 10.9 sq ft heat exchanger at 64.8 lb per the manual, with hot water handled by an indirect tank.

Natural gasPropaneHeating-only

Frequently asked questions

What changes between the IP090S and the IP120S?

Heating input rises from 90 to 120 MBH and the manual shows the larger 10.9 sq ft heat exchanger, 0.88 gal water content and a 64.8 lb weight for the 120 model.

Why does the IP120S page look like it weighs 112.4 lb?

The rinnai.ca product page prints 112.4 lb — the same figure the manual gives the IP175S/IP199S — so it is treated as a copy error. The manual's figure for the IP120S is 64.8 lb (29.4 kg).

Do both boilers vent the same?

Yes: 75 equivalent feet in 2" or 160 in 3" twin pipe, per the solo I&O manual.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate