Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Rinnai IP120199C vs IP150199C

Verdict in brief

The IP120199C and IP150199C are the same boiler below the maximum: both are 76.1 lb small-chassis combis on the 10.9 sq ft heat exchanger with 0.88 gal of water, 199 MBH of DHW at 9.8 GPM and identical venting. The only published difference is the heating ceiling — 120 MBH versus 150 MBH of input — so the choice is purely about the heat-loss calculation.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Rinnai IP120199C and Rinnai IP150199C
SpecificationRinnai IP120199CRinnai IP150199C
Heating input, minimum15 MBH15 MBH
Heating input, maximum120 MBH150 MBH
DHW input, maximum199 MBH199 MBH
Maximum DHW flow rate9.8 GPM9.8 GPM
Efficiency (AFUE)96 %96 %
Weight76.1 lb76.1 lb
Water content (CH)0.88 gal0.88 gal
Max. equivalent vent length, 2"75 ft75 ft
Max. equivalent vent length, 3"160 ft160 ft

What actually separates them

Every published figure except the heating maximum matches between these two models: 76.1 lb per the manual, the 10.9 sq ft heat exchanger, 0.88 gal CH water content, 199 MBH DHW input, 9.8 GPM maximum flow, and 75 ft 2" plus 160 ft 3" twin-pipe venting. The product pages print 62 lb for both — a documented discrepancy with the manual figure used on Boilers.ca.

The single difference is central-heating input: 120,000 BTU/h on the 120 model and 150,000 BTU/h on the 150 model, both from the same 15 MBH minimum fire. Because the minimums and hardware are identical, the larger model costs nothing in low-fire behaviour — the extra 30 MBH is pure ceiling.

That makes the decision a straight heat-loss question: a home whose room-by-room calculation can approach 120 MBH on a design day is where the IP150199C justifies itself. Beyond 150 MBH of load, the next rung is the 175k large-chassis combi (IP175199C), which remains a draft record pending review of its raster-only manual.

CurrentSold in Canada
Input
15–120 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP120199C lifts heating to 120 MBH of input while keeping the 199 MBH DHW side: 15 to 120 MBH central heating with 9.8 GPM maximum hot-water flow, in the heavier 76.1 lb small chassis.

Natural gasPropaneCombi
CurrentSold in Canada
Input
15–150 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP150199C is the top of the fully documented I-Series+ combi range: 15 to 150 MBH central-heating input with a 199 MBH DHW side (9.8 GPM maximum), the largest small-chassis combi at 76.1 lb.

Natural gasPropaneCombi

Frequently asked questions

Are the IP120199C and IP150199C different physical units?

No published spec separates them: same 76.1 lb chassis, heat exchanger, water content, DHW rating and venting per the manual. Only the heating ceiling differs (120 versus 150 MBH).

Why would anyone choose the IP150199C?

Only for the 150 MBH heating ceiling. If the heat-loss calculation can exceed 120 MBH on a design day, the 150 model covers it with no low-fire or footprint penalty.

What comes above the IP150199C?

The IP175199C and IP199199C large-chassis combis. Both are sold in Canada but remain draft records on Boilers.ca pending review of their raster-only I&O manuals.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate