Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Rinnai IP120S vs IP150S

Verdict in brief

The IP120S and IP150S are the same solo below the maximum: both are 64.8 lb small-chassis units on the 10.9 sq ft heat exchanger with 0.88 gal of water, a 15 MBH minimum fire and identical venting. The only published difference is the heating ceiling — 120 MBH versus 150 MBH of input — so the larger model is worth it only when the heat-loss calculation needs it.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Rinnai IP120S and Rinnai IP150S
SpecificationRinnai IP120SRinnai IP150S
Heating input, minimum15 MBH15 MBH
Heating input, maximum120 MBH150 MBH
Efficiency (AFUE)96 %96 %
Weight64.8 lb64.8 lb
Water content (CH)0.88 gal0.88 gal
Max. equivalent vent length, 2"75 ft75 ft
Max. equivalent vent length, 3"160 ft160 ft

What actually separates them

Every published figure except the heating maximum matches: 64.8 lb per the manual (the IP150S product page prints 62.6 lb, a documented discrepancy), the 10.9 sq ft heat exchanger, 0.88 gal CH water content, 15 MBH minimum fire, and 75 ft 2" plus 160 ft 3" venting.

The single difference is central-heating input: 120,000 BTU/h on the 120 model against 150,000 BTU/h on the 150. Because the hardware and minimum fire are identical, the 150 costs nothing in day-to-day modulation — the extra 30 MBH is pure design-day ceiling.

Both solos are heating-only and control an indirect tank with recovery priority by default. Above 150 MBH of load the line continues with the IP175S and IP199S, which remain draft records here pending review of their raster-only I&O manuals.

CurrentSold in Canada
Input
15–120 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP120S steps the heating-only solo line up to 120 MBH of input (15-120 MBH) on the 10.9 sq ft heat exchanger at 64.8 lb per the manual, with hot water handled by an indirect tank.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
15–150 MBH
Output (max)
—
AFUE
96 %

The Rinnai IP150S is the largest fully documented I-Series+ solo: a heating-only condensing boiler firing 15 to 150 MBH of input at 64.8 lb per the manual, controlling an indirect tank for domestic hot water.

Natural gasPropaneHeating-only

Frequently asked questions

Are the IP120S and IP150S different physical units?

No published spec separates them: same 64.8 lb chassis, heat exchanger, water content and venting per the manual. Only the heating ceiling differs.

Why choose the IP150S over the IP120S?

Only for the 150 MBH ceiling. If the heat-loss calculation stays under 120 MBH on a design day, the two boilers behave identically in service.

What is the next size above the IP150S?

The IP175S (175 MBH) and IP199S (199 MBH), which are draft records on Boilers.ca pending review of their raster-only manuals and are named in Health Canada recall RA-77507.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate