Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Navien NFB700-600C vs NFB700-800C

Verdict in brief

Moving from the NFB700-600C to the NFB700-800C crosses into the large frame of the NFB700-C line: weight rises from 622 to 750 lb dry (843 to 1,059 lb with water), water content from 26.5 to 37 gallons, connections from 2" to 2 1/2" NPT water, venting from 4" to 6", and the minimum fire from 40 to 66 MBH. Input rises to a 799 MBH ceiling with a 779 MBH capacity and a 677 MBH net AHRI rating, against 599, 584 and 508 MBH on the 600C.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Navien NFB700-600C and Navien NFB700-800C
SpecificationNavien NFB700-600CNavien NFB700-800C
Input, minimum40 MBH66 MBH
Input, maximum599 MBH799 MBH
Heating capacity584 MBH779 MBH
Net AHRI water rating508 MBH677 MBH
Thermal efficiency97.5 %97.5 %
Weight622 lb750 lb
Water content26.5 gal37 gal
Heating water connections2" NPT2 1/2" NPT
Gas connection1" NPT1 1/4" NPT
Venting4" PVC, CPVC, approved polypropylene or approved stainless steel, or 4" special gas vent Type BH (Class III A/B/C)6" PVC, CPVC, approved polypropylene or approved stainless steel, or 6" special gas vent Type BH (Class III A/B/C)

What actually separates them

The 600C-to-800C step is the frame change in the NFB700-C line: the 800C moves to the 750 lb dry (1,059 lb with water) cabinet at 23.8 x 73.3 x 33.0 in with 37 gallons of water content, against the 600C's 622 lb (843 lb with water), 23.8 x 72.1 x 31.0 in frame and 26.5 gallons. Connections and venting step up with it — 2 1/2" NPT water and 1 1/4" NPT gas with 6" venting on the 800C against 2" NPT, 1" NPT and 4" on the 600C.

Ratings rise by about a third: the 800C fires 66 to 799 MBH with a 779 MBH heating capacity and a 677 MBH net AHRI water rating, against 40 to 599 MBH, 584 MBH and 508 MBH on the 600C. Both print 97.5% thermal efficiency and a 12–160 PSI water pressure range.

The minimum fire rises from 40 to 66 MBH at the frame change, so in a low-load building the 600C tracks part-load demand more closely, while the 800C's larger frame, pipe sizes and flue size support the higher ceiling. The choice follows the load calculation plus the plant's piping and venting constraints, not the building size alone.

CurrentSold in Canada
Input
40–599 MBH
Output (max)
—
AFUE
—

The Navien NFB700-600C steps the floor-standing NFB700-C line to 40 to 599 MBH of input with a 584 MBH heating capacity and a 508 MBH net AHRI water rating at 97.5% thermal efficiency, in the same 622 lb cabinet as the 500C.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
66–799 MBH
Output (max)
—
AFUE
—

The Navien NFB700-800C is the third size of the floor-standing NFB700-C commercial boiler series: 66 to 799 MBH of input with a 779 MBH heating capacity and a 677 MBH net AHRI water rating at 97.5% thermal efficiency, in the larger 750 lb cabinet.

Natural gasPropaneHeating-only

Frequently asked questions

Is the NFB700-800C physically bigger than the NFB700-600C?

Yes: 750 lb dry (1,059 lb with water) against 622 lb (843 lb), 37 gallons against 26.5, and a slightly taller and deeper cabinet (73.3 x 33.0 in against 72.1 x 31.0 in on the same 23.8 in width).

What connection and venting sizes change?

Water connections step from 2" to 2 1/2" NPT, gas from 1" to 1 1/4" NPT, and venting from 4" to 6" pipe between the 600C and the 800C.

When is the 800C worth choosing over the 600C?

When the heat-loss or plant calculation approaches the 600C's 599 MBH ceiling. Note the 800C's minimum fire is 66 MBH against 40 MBH, so very low part loads track better on the smaller frame.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate