Skip to content
Boilers.caby ROMA Heating & Cooling

Bryan Boilers · Free Flex (FF) Series

Bryan Free Flex 1000

The Bryan Free Flex 1000 is a stainless-steel flexible-watertube condensing boiler rated 999,000 BTU/hr input and 949,000 BTU/hr output at 95% thermal / 94% combustion efficiency, 28 BHP, with 5:1 turndown in Bryan's published submittal.

CurrentCanadian status unknown

Key figures

Max input
999,000 BTU/HR
Max CSA output
949,000 BTU/HR
AFUE
—
Min input
200,000 BTU/HR
Natural gasHeating-onlycommercial

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Bryan Free Flex 1000 in practice

Bryan's Free Flex 1000 submittal prints 200,000 BTU/hr low fire, 999,000 BTU/hr high fire and 949,000 BTU/hr high-fire output at 28 BHP, with 95% thermal efficiency and 94% combustion efficiency on natural gas only, 20 gallons of water volume and a 1185 lb approximate shipping weight.

The unit fires at full modulation with 5:1 burner turndown; the submittal prints 'Low NOx Emissions: Capable, Consult Factory'. Flows range from 22 gpm at 85°F ΔT (minimum) to 95 gpm at 20°F ΔT (maximum), and the dimensions table lists 64" high × 29" wide × 72" long with 3" Victaulic water outlet and inlet, 6" vent and air intake and a 1" gas inlet.

The heat exchanger is ASME stainless steel flexible watertube with field-replaceable tubes, MAWP 160 PSIG and 210°F maximum temperature, backed by a ten-year pressure vessel warranty and lifetime thermal shock warranty. Bryan publishes the parts manual and Concert control manual as public downloads. No official Canadian-sales statement was found.

Best suited to

  • Commercial condensing plants documenting an installed Free Flex 1000 against Bryan's submittal
  • Projects that require field-replaceable stainless water tubes
  • Variable-primary or primary/secondary hydronic systems in the 28 BHP class

Applicability and support

Model number
FREE FLEX-1000
Canadian availability
unknown
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Series terms

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Bryan Boilers. Units are shown with every value; notes flag conflicting sources or missing figures.

Bryan Free Flex 1000 specifications
SpecificationValueNote
Input
Input, low fire200,000 BTU/HRAs printed in the Free Flex submittal ratings table.
Input, high fire999,000 BTU/HRAs printed in the Free Flex submittal ratings table.
Output
Output, high fire949,000 BTU/HRAs printed in the Free Flex submittal ratings table.
Efficiency
Thermal efficiency95 %As printed in the Free Flex submittal ratings table; Bryan's page states AHRI certified at 95% thermal efficiency.
Combustion efficiency94 %As printed in the Free Flex submittal ratings table.
Venting and air
Vent and air intake6"As printed in the Free Flex submittal dimensions/connections table.
Physical and connections
Water volume20 galAs printed in the Free Flex submittal ratings table.
Approx. shipping weight1,185 lbAs printed in the Free Flex submittal ratings table.
Width29"As printed in the Free Flex submittal dimensions table.
Length72"As printed in the Free Flex submittal dimensions table.
Height64"As printed in the Free Flex submittal dimensions table.
Water connections (out / in)3" Victaulic / 3" VictaulicAs printed in the Free Flex submittal dimensions/connections table.
Gas inlet connection1"As printed in the Free Flex submittal dimensions/connections table.
Operating limits and other
Boiler horsepower28 BHPAs printed in the Free Flex submittal ratings table.
FuelNatural Gas ONLYAs printed in the Free Flex submittal ratings table.
Burner turndown5:1As printed in the Free Flex submittal ratings table.
Low NOx emissionsCapable, Consult FactoryAs printed in the Free Flex submittal ratings table.
Minimum flow rate22 gpm at 85°F ΔTAs printed in the Free Flex submittal flows and pressure-drops table.
Maximum flow rate95 gpm at 20°F ΔTAs printed in the Free Flex submittal flows and pressure-drops table.
ASME Section IV rating160 PSIG / 210°FASME Section IV (Max 160 PSIG / 210°F) as printed on the Free Flex submittal.

Frequently asked questions

What are the Free Flex 1000 ratings?

Bryan's submittal prints 200,000 BTU/hr low fire, 999,000 BTU/hr high fire, 949,000 BTU/hr output, 28 BHP, 95% thermal efficiency and 5:1 turndown.

What fuel does the Free Flex 1000 use?

The submittal prints 'Fuel: Natural Gas ONLY' for the documented sizes.

Are the Free Flex water tubes replaceable in the field?

Yes. Bryan's Free Flex page states the design is 'fully field repairable' with field-replaceable stainless steel water tubes.

Questions about the Bryan Free Flex 1000?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate