Lochinvar Knight XL APS Open — Air Pressure Switch Contacts are Open
APS Open
Air pressure switch contacts are open. The air pressure switch contacts are open, so check the switch wiring (wires should be connected to the common and normally closed terminals), check that air intake lengths do not exceed the maximums in the Knight XL I&O manual, check the intake pipes and terminations and the reference hoses for blockage, inspect the burner and heat exchanger, and replace a faulty air pressure switch. The table classifies it as Lockout (manual reset).
Applies to
This venting or air-supply fault code is displayed by the Knight XL control (text faults) on Knight XL models (KBX0400 through KBX1000), as documented in Knight XL (KBX) Service Manual, 100383164 Rev C — Table 3-4 fault codes (100383164 Rev C). Codes can differ between controller generations, so always check the manual that matches your unit.
- Lochinvar Knight XL Commercial (KBX)
- Lochinvar Knight XL KBX0400
- Lochinvar Knight XL KBX0500
- Lochinvar Knight XL KBX0650
- Lochinvar Knight XL KBX0800
- Lochinvar Knight XL KBX1000
Controller: Knight XL control (text faults). Source manual: 100383164 Rev C (2025-10).
Why a code is not a diagnosis
A venting or air-supply code points at the combustion-air path: a blocked terminal, a restricted flue, a failed fan, or a condensate restriction. It does not say which, and running an appliance with a blocked flue is unsafe.
Safe things to observe
- If a carbon-monoxide alarm sounds anywhere in the building, leave immediately and call 911 from outside.
- From a safe distance, check that the vent terminal and combustion-air inlet are not blocked.
- Do not run the appliance while a blockage is suspected.
Do not
- Do not put anything into the vent or air-intake openings.
- Do not remove or modify vent pipe.
How professional service helps
- A technician inspects the full vent and combustion-air path, clears blockages and checks the fan.
- Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Parts and service
Parts commonly involved
These parts appear in the documented text for this alert. A code reports a condition, not a failed part — a technician confirms the cause by testing before anything is replaced.
Heat exchanger
The heat exchanger is where a boiler transfers heat from the burner flame to the water that heats your home.
What a technician checks →Air pressure switch
An air pressure switch proves that the combustion fan is moving air and that the vent path is clear before the boiler is allowed to fire.
What a technician checks →Burner assembly
The burner assembly is where gas and air meet and burn inside a boiler, and its condition decides whether combustion is clean or makes carbon…
What a technician checks →Vent terminal
The vent terminal is where a boiler's exhaust and combustion-air pipes meet the outdoors, and keeping it clear is one of the few combustion tasks a…
What a technician checks →
Service for this alert
- Gas Boiler Repair
Licensed gas technicians from ROMA Heating & Cooling diagnose and repair residential and light-commercial gas boilers across…
- Emergency Boiler Repair
Priority gas boiler repair for homes and buildings in Greater Vancouver with no heat, no hot water, a locked-out boiler or a leak.
- Gas Boiler Replacement
ROMA replaces old, failed or inefficient gas boilers in Greater Vancouver, handling removal, venting and gas-supply changes,…
Every boiler part explained — what it does, how it fails and what a technician checks.
Documented for Lochinvar Knight XL Commercial (KBX).
Frequently asked questions
Can I clear this code myself?
Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Knight XL (KBX) Service Manual, 100383164 Rev C — Table 3-4 fault codes · 100383164 Rev C · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.