Navien
Navien NPE-180A2
- Input
- 10–150 MBH
- Output (max)
- —
- AFUE
- —
The Navien NPE-180A2 is a condensing tankless water heater — a DHW-only appliance, not a boiler — firing 10,000 to 150,000 BTU/h at 0.95 UEF with up to 8.4 GPM at a 35°F rise.
Canada-wide gas boiler information · On-site service in Greater Vancouver, BC
Boilers.ca is a brand of ROMA Heating & Cooling · Licensed gas contractor LGA0202903
Navien · Series
The NPE-A2 is Navien's premium condensing tankless water heater line for Canada — NPE-180A2, NPE-210A2 and NPE-240A2 — each with the patented ComfortFlow buffer-tank and recirculation system, rated 0.95 UEF and firing from 10,000–13,300 BTU/h up to 150,000–199,900 BTU/h. It is a water heater, not a boiler.
Series facts
The NPE-A2 series is Navien's premium condensing tankless water heater line, sold in Canada alongside the standard NPE-S2 series. Every NPE-2 model is a domestic-hot-water appliance with no hydronic heating loop: Navien's ComfortFlow system adds a buffer tank, a recirculation pump and fine-tuned controls inside the cabinet so hot water arrives without a long wait, and dual stainless steel heat exchangers carry the load.
Three A2 sizes cover the Canadian line: NPE-180A2 fires 10,000 to 150,000 BTU/h, NPE-210A2 fires 12,000 to 180,000 BTU/h and NPE-240A2 fires 13,300 to 199,900 BTU/h, all at 0.95 UEF per the product pages. Maximum flow at a 35°F (19.4°C) temperature rise is published at 8.4, 10.1 and 11.2 GPM respectively, with 3/4" NPT water and gas connections and a 17.3" W × 27.4" H × 13.2" D cabinet weighing 73 lb on the 180A2 and 77 lb on the two larger models.
Navien's product pages for the NPE-A2 list the line as CSA, NSF-5 and SCAQMD 1146.2 approved with an AHRI number printed per model, and every NPE-2 unit is field convertible from natural gas to propane. Boilers.ca records the NPE-A2 as a DHW-only tankless water heater: where a home needs both heating and hot water from one appliance, Navien's combi lines (NCB-H and NFC-H) are the boiler products, and the NPE can be paired with them in Navien's Ready-Link cascade for combined DHW capacity.
Highlights
Models
One canonical page per model with input, output and efficiency kept separate.
Navien
The Navien NPE-180A2 is a condensing tankless water heater — a DHW-only appliance, not a boiler — firing 10,000 to 150,000 BTU/h at 0.95 UEF with up to 8.4 GPM at a 35°F rise.
Navien
The Navien NPE-210A2 is a condensing tankless water heater — a DHW-only appliance, not a boiler — firing 12,000 to 180,000 BTU/h at 0.95 UEF with up to 10.1 GPM at a 35°F rise.
Navien
The Navien NPE-240A2 is a condensing tankless water heater — a DHW-only appliance, not a boiler — firing 13,300 to 199,900 BTU/h at 0.95 UEF with up to 11.2 GPM at a 35°F rise.
| Specification | Navien NPE-180A2 | Navien NPE-210A2 | Navien NPE-240A2 |
|---|---|---|---|
| Input, minimum | 10 MBH | 12 MBH | 13.3 MBH |
| Input, maximum | 150 MBH | 180 MBH | 199.9 MBH |
| output-max | — | — | — |
| afue | — | — | — |
| turndown | — | — | — |
| vent-max-3 | — | — | — |
| vent-max-2 | — | — | — |
| Weight | 73 lb | 77 lb | 77 lb |
Read the full comparison: Navien NPE-180A2 vs NPE-210A2 →
Read the full comparison: Navien NPE-210A2 vs NPE-240A2 →
Read the full comparison: Navien NPE-180A2 vs Navien NPE-240A2 →
Error codes and alerts
No alerts documented for this series yet.
Manuals
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Services for Navien boilers
No. The NPE-A2 is a condensing tankless water heater: it heats domestic hot water on demand and has no space-heating loop. Navien's combi boilers are the NCB-H and NFC-H series, and NPE units can be cascaded with them for additional DHW capacity.
The A2 marks the second-generation NPE-A (Advanced) line with the built-in ComfortFlow buffer tank and recirculation pump; the NPE-S2 is the standard line without that recirculation hardware. Both are condensing tankless water heaters.
Sizing follows the household's peak hot-water demand and the incoming water temperature, not floor area. Navien publishes 8.4 GPM at a 35°F rise for the NPE-180A2, 10.1 for the 210A2 and 11.2 for the 240A2; a licensed contractor should confirm the sizing against the installation manual.
Describe what the boiler is doing and get a straight answer about the next step.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.