Skip to content
Boilers.caby ROMA Heating & Cooling

U.S. Boiler Company · Alpine

U.S. Boiler Company Alpine ALP285B

The U.S. Boiler Company Alpine ALP285B fires 57–285 MBH input with 262 MBH DOE heating capacity and a 228 MBH net AHRI water rating at 95% AFUE — the first of the taller floor-mounted sizes with 4-inch venting — on the stainless-steel condensing platform with the Sage2.3 touch-screen control.

CurrentCanadian status unknown

Key figures

Max input
285 MBH
Max CSA output
AFUE
95 %
Min input
57 MBH
Natural gasPropaneHeating-onlyresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

U.S. Boiler Company Alpine ALP285B in practice

The Alpine ALP285B is a stainless-steel condensing gas boiler rated at 57–285 MBH input. Its row in the Alpine Product Data Sheet (Form HYDL04081) prints 262 MBH DOE heating capacity and a 228 MBH net AHRI water rating at 95% AFUE. Ratings are for sea level to 2,000 feet and de-rate four percent per additional 1,000 feet.

The boiler ships at approximately 256 lb and measures 21-13/16" wide by 43-7/16" high per the data sheet dimension table. Venting is 4" for exhaust and air intake, and the vent table allows 4" intake/vent to 100 ft per side. Standard equipment includes the Sage2.3 control with LCD touch screen, variable-speed combustion blower, negative-pressure gas valve, stainless-steel heat exchanger, a 30 PSI safety relief valve (50 PSI on the ALP399C) and outdoor reset with a wired outside sensor; the 80–210 sizes are wall or floor mountable and the ALP285B/ALP399C are floor mounted.

Boilers.ca documents this size at model level for identification and service planning. Installation, gas, electrical and venting work belongs with a licensed contractor working from the Alpine I&O manual. No official Canadian-sales statement was found, so canadianStatus stays 'unknown'.

Best suited to

  • 57-to-285 MBH residential heat-loss loads
  • Homes pairing the boiler with an indirect water heater
  • Buyers comparing the six Alpine sizes on the shared Product Data Sheet

Applicability and support

Model number
ALP285B
Canadian availability
unknown
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Series terms

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by U.S. Boiler Company. Units are shown with every value; notes flag conflicting sources or missing figures.

U.S. Boiler Company Alpine ALP285B specifications
SpecificationValueNote
Input
Input, minimum57 MBHMinimum input per the Alpine Product Data Sheet ratings table (sea level to 2,000 ft).
Input, maximum285 MBHMaximum input per the Alpine Product Data Sheet ratings table; ratings de-rate four percent per 1,000 ft above 2,000 ft.
Output
DOE heating capacity262 MBHDOE heating capacity per the Alpine Product Data Sheet ratings table.
Net AHRI water rating228 MBHNet AHRI water rating per the Alpine Product Data Sheet (piping and pickup allowance applied per the table notes).
Efficiency
Efficiency (AFUE)95 %AFUE per the Alpine Product Data Sheet ratings table; the product page headlines 95% AFUE and ENERGY STAR certification.
Domestic hot water
Domestic hot waterHeating-only boiler — domestic hot water comes from a separate indirect tank or water heater
Venting and air
Vent and intake size4"Vent and air-intake size per the Product Data Sheet vent table: 4" intake/vent to 100 ft per side.
VentingDirect vent, sealed combustion, Category IVDirect-vent sealed-combustion appliance with CPVC-to-PVC vent kit included (30" CPVC, 90° elbow, two vent terminals, screens) per the standard equipment list.
Physical and connections
Approx. shipping weight256 lbApproximate shipping weight per the Alpine Product Data Sheet ratings table.
Dimensions (width × height)21-13/16" × 43-7/16"Cabinet width and height per the Alpine Product Data Sheet dimension table.
Supply/return connections1" NPT (3/4" return tapping on ALP080B/ALP105B per the dimension table)Water connection sizes per the Alpine Product Data Sheet dimension and connection data.
Gas connection1/2" NPT (3/4" on ALP285B/ALP399C per the dimension table)Gas valve inlet size per the Alpine Product Data Sheet dimension table.
Operating limits and other
ControlSage2.3 Boiler Control System with LCD touch screenSage2.3 control with self-guided menus, 100+ help screens, built-in self diagnostics, three circulator outputs, eight-boiler sequencer, 4–20 MV inputs, outdoor reset, DHW priority and warm-weather shutdown per the data sheet.
FuelNatural gas or LP gasBoilers shipped set for natural gas with field adjustment for LP per the Product Data Sheet notes.

Frequently asked questions

What are the Alpine ALP285B's ratings?

57–285 MBH input, 262 MBH DOE heating capacity and a 228 MBH net AHRI water rating at 95% AFUE per the Alpine Product Data Sheet.

Can the Alpine ALP285B be wall mounted?

No — the Product Data Sheet lists the 285 and 399 sizes as floor-mounted models; the ALP080B through ALP210B sizes are listed for wall or floor mounting with a pre-installed hanging bracket and wall-mount kit included.

Questions about the U.S. Boiler Company Alpine ALP285B?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate