Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

Buderus GB162-80 kW vs GB162-100 kW

Verdict in brief

The GB162-80 kW and GB162-100 kW are the only two North American GB162 sizes and share the same 154 lb wall cabinet, 4" flue connection, UP 26-99 pump group and 1.3 gal heat-exchanger volume. The 100 kW fires to 333,000 BTU/hr against the 80 kW's 290,000 BTU/hr, carries a 295,000 BTU/hr CSA output (against 261,000) and draws 156 W full load (against 104 W) — but its published efficiency is BTS 2000 (96.1 part load) rather than the 80 kW's AFUE 93.8/93.9.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of Buderus GB162-80 kW and Buderus GB162-100 kW
SpecificationBuderus GB162-80 kWBuderus GB162-100 kW
Rated thermal load, minimum (NG)72 MBH72 MBH
Rated thermal load, maximum (NG)290 MBH333 MBH
CSA output261 MBH295 MBH
Weight (without packaging)154 lb154 lb
Maximum flow temperature180 °F180 °F
Heating circuit volume of heat exchanger1.3 gal1.3 gal
Electrical power consumption, full load104 W156 W

What actually separates them

Both sizes share the complete Logamax plus GB162 platform: 50.4 x 20.5 x 18.3 in wall cabinet with pump group, 154 lb (70 kg) without one, 4" flue connection (4"/4" parallel for room-air-independent runs), UP 26-99 pump group, 1.3 gal heat-exchanger volume and 50 psi maximum working pressure. Only the firing package changes.

Natural-gas input runs 72,000 to 290,000 BTU/hr on the 80 kW and 72,000 to 333,000 BTU/hr on the 100 kW, with CSA outputs of 261,000 and 295,000 BTU/hr. Full-load electrical draw rises from 104 to 156 W; partial-load draw is 29 W on both. Derates above sea level also differ: 2.3% per 1,000 ft on the 80 kW (NG) versus 2.1% on the 100 kW.

The efficiency documentation is the interesting difference: the service-manual appendix prints AFUE 93.8 (NG) / 93.9 (LP) at 80/180 °F for the 80 kW but no AFUE row for the 100 kW, listing BTS 2000 figures (96.1 part load, 90.8 full load) instead. Bosch's CA page claims 'up to 93% AFUE' for the family. Both units remain current in Canada while the US catalog lists the GB162 as discontinued.

Bosch Thermotechnology

Buderus GB162-80 kW

CurrentSold in Canada
Input
72–290 MBH
Output (max)
—
AFUE
93.8 %

The Buderus GB162-80 kW is the smaller of the two North American GB162 sizes: 72,000 to 290,000 BTU/hr natural-gas input, 261,000 BTU/hr CSA output, 93.8/93.9 AFUE at 80/180 °F, in a 154 lb wall-hung Logamax plus cabinet with 4" flue connection.

Natural gasPropaneHeating-only

Bosch Thermotechnology

Buderus GB162-100 kW

CurrentSold in Canada
Input
72–333 MBH
Output (max)
—
AFUE
—

The Buderus GB162-100 kW is the largest North American GB162: 72,000 to 333,000 BTU/hr natural-gas input and 295,000 BTU/hr CSA output, with BTS 2000 efficiency figures (96.1 part load) in place of an AFUE row, in the same 154 lb wall cabinet as the 80 kW.

Natural gasPropaneHeating-only

Frequently asked questions

Are the two GB162 sizes different boilers or one chassis?

One chassis: both sizes share the cabinet, weight, flue connection, pump group and pressure rating. The 100 kW has a larger firing package and higher electrical draw.

Which GB162 is more efficient?

The manuals document the 80 kW at AFUE 93.8/93.9 and the 100 kW with BTS 2000 figures (96.1 part load) instead of an AFUE row — figures measured on different methods, so compare them carefully.

Is the 100 kW worth the step up?

Only when the load needs it: 333,000 BTU/hr of input against 290,000 BTU/hr buys about 34 MBH of CSA output (295,000 versus 261,000) at higher full-load power draw.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate