Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

IBC SL 20-160 G3 vs Viessmann Vitodens 100-W B1HE-150

Verdict in brief

The IBC SL 20-160 G3 and Viessmann Vitodens 100-W B1HE-150 are 95% AFUE heating-only condensing boilers sized for larger homes, but they are not equal twins: IBC fires 20 to 160 MBH and weighs 102 lb, while Viessmann fires 15.5 to 150 MBH and weighs 179 lb. The B1HE's 15.5 MBH minimum fire suits low shoulder-season loads better; the SL's higher ceiling suits big heat-loss homes; a heat-loss calculation decides.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of IBC SL 20-160 G3 and Viessmann Vitodens 100-W B1HE-150
SpecificationIBC SL 20-160 G3Viessmann Vitodens 100-W B1HE-150
Input, minimum20 MBH15.5 MBH
Input, maximum160 MBH150 MBH
Efficiency (AFUE)95 %95 %
Turndown ratioup to 8:1up to 10:1
Weight (empty)102 lb179 lb
FuelNatural gas or propaneNatural gas or liquid propane
Domestic hot waterNot a combi; indirect tank connects directly to the boilerNot a combi; pair with an indirect tank

What actually separates them

Both are heating-only condensing boilers rated 95% AFUE with natural gas or propane listed, but their input ranges only partly overlap: IBC publishes 20 to 160 MBH (5.86 to 46.9 kW) for the SL 20-160 G3, while Viessmann Canada publishes 15.5 to 150 MBH (4.5 to 44.0 kW) for the B1HE-150. Homes whose heat-loss and indirect-tank recovery sit between 150 and 160 MBH therefore fit the IBC but exceed the Viessmann's ceiling.

Minimum fire rates point the other way: the IBC idles at 20 MBH while the B1HE-150 drops to 15.5 MBH. In a house whose winter design load is near 100-130 MBH, the Viessmann's lower floor lets it modulate through mild spells, while the IBC's 8:1 published turndown (up to 10:1 in its brochure) means a higher idle point than the B1HE's claimed up-to-10:1 figure implies at this size.

Installation weight diverges sharply: the SL 20-160 G3 weighs 102 lb (46.3 kg) and vents in 3" to 170 equivalent feet or 2" to 35 feet per side, while the B1HE-150 weighs 179 lb (81 kg) in a 39-inch-tall cabinet with series venting quoted up to about 180 ft. Both need an indirect tank for hot water, and both are sized by a heat-loss calculation rather than floor area.

IBC Technologies

IBC SL 20-160 G3

CurrentSold in Canada
Input
20–160 MBH
Output (max)
147 MBH
AFUE
95 %

The IBC SL 20-160 G3 is the 160 MBH member of the SL Series G3: a wall-hung, 95% AFUE condensing boiler for natural gas or propane, bridging the 115 and 199 models for homes with higher heat loss or hot-water loads.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
15.5–150 MBH
Output (max)
—
AFUE
95 %

The Vitodens 100-W B1HE-150 is the 150 MBH heating-only model of Viessmann Canada's 100-W series: 15.5 to 150 MBH input at 95% AFUE, stepping up to a 179 lb, 39-inch-tall cabinet for larger detached homes.

Natural gasPropaneHeating-only

Frequently asked questions

Is the B1HE-150 or the SL 20-160 G3 lighter to mount?

The IBC SL 20-160 G3 weighs 102 lb against the B1HE-150's 179 lb, so the IBC is easier to lift and hang; the heavier Viessmann needs a sturdier wall and lifting plan.

Can the SL 20-160 G3 cover a load the B1HE-150 cannot?

Yes, within limits: IBC rates the SL to 160 MBH input while Viessmann stops at 150 MBH, so design loads between the two favor the IBC. A heat-loss calculation should confirm the actual requirement before sizing.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 8, 2026. Last updated September 8, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate