Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

IBC SL 30-199 G3 vs Viessmann Vitodens 100-W B1HE-199

Verdict in brief

The IBC SL 30-199 G3 and Viessmann Vitodens 100-W B1HE-199 both reach 199 MBH input at 95% AFUE as heating-only wall-hung boilers, but they modulate very differently: IBC's minimum input is 32 MBH while Viessmann's is 19.9 MBH, and the IBC weighs 152 lb versus the B1HE's 179 lb. A heat-loss calculation decides whether the home needs the full 199 MBH or would short-cycle on either unit.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of IBC SL 30-199 G3 and Viessmann Vitodens 100-W B1HE-199
SpecificationIBC SL 30-199 G3Viessmann Vitodens 100-W B1HE-199
Input, minimum32 MBH19.9 MBH
Input, maximum199 MBH199 MBH
Efficiency (AFUE)95 %95 %
Turndown ratioup to 8:1up to 10:1
Weight (empty)152 lb179 lb
FuelNatural gas or propaneNatural gas or liquid propane
Domestic hot waterNot a combi; indirect tank connects directly to the boilerNot a combi; pair with an indirect tank

What actually separates them

Both models cap out at the classic 199 MBH input (58.3 kW in each maker's published figures) with a 95% AFUE rating and natural-gas-or-propane operation, which makes them candidates for the same large homes and small multi-suite buildings. The decisive published difference is at the bottom of the range: IBC lists 32 MBH minimum input for the SL 30-199 G3 while Viessmann lists 19.9 MBH for the B1HE-199.

The lower Viessmann floor matters in mild weather and at part load, where the IBC's higher idle point means more on-off cycling in a building whose true design load is well under 199 MBH. Both makers publish marketing turndown claims — up to 8:1 on the IBC page (10:1 in its brochure) versus up to 10:1 for the B1HE — so the minimum-fire figures above are the more reliable planning numbers.

On the installation side the SL 30-199 G3 weighs 152 lb (69 kg) and uses 1 1/4" water connections with 3" venting to 150 equivalent feet per side, while the B1HE-199 weighs 179 lb (81 kg) in a 39-inch-tall cabinet with the series' venting quoted to about 180 ft. Both are heating-only, so domestic hot water comes from an indirect tank, and sizing starts from a room-by-room heat-loss calculation.

IBC Technologies

IBC SL 30-199 G3

CurrentSold in Canada
Input
32–199 MBH
Output (max)
181.3 MBH
AFUE
95 %

The IBC SL 30-199 G3 is the largest residential SL G3 boiler: 32 to 199 MBH input, 95% AFUE, natural gas or propane. It suits large homes, homes with high hot-water demand through an indirect tank, and some small multi-suite buildings.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
19.9–199 MBH
Output (max)
—
AFUE
95 %

The Vitodens 100-W B1HE-199 is the largest heating-only model in Viessmann Canada's 100-W series: 19.9 to 199 MBH input at 95% AFUE in the 179 lb cabinet, sized for big homes and heavy indirect-tank demand.

Natural gasPropaneHeating-only

Frequently asked questions

Why does the B1HE-199's minimum fire matter?

At 19.9 MBH against the IBC SL 30-199 G3's 32 MBH, the Viessmann can keep firing steadily in mild weather and at low part load, where the IBC would need more load to stay off its cycling threshold.

Are both boilers 199 MBH in actual input?

Yes, each maker publishes 199 MBH maximum input (58.3 kW); the differences are minimum input, weight, connections and venting, so sizing should follow a heat-loss calculation, not the equal-looking model numbers.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 8, 2026. Last updated September 8, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate