Skip to content
Boilers.caby ROMA Heating & Cooling

Comparison

IBC VX 199 vs Viessmann Vitodens 200-W B2HE-199

Verdict in brief

The IBC VX 199 and Viessmann Vitodens 200-W B2HE-199 are both 95% AFUE, 199 MBH-input heating-only wall-hung condensing boilers, but their firing floors differ by more than half: IBC's VX 199 cannot go below 30.6 MBH while the B2HE-199 modulates down to 14 MBH. The IBC weighs 88 lb versus 179 lb and keeps 1" connections; the Viessmann carries a claimed up-to-14:1 turndown and a longer 198 ft vent quote. Heat-loss calculation decides.

Side by side

Published manufacturer figures. Input and output are kept separate; blanks mean the manufacturer did not publish that value.

Comparison of IBC VX 199 and Viessmann Vitodens 200-W B2HE-199
SpecificationIBC VX 199Viessmann Vitodens 200-W B2HE-199
Input, minimum30.6 MBH14 MBH
Input, maximum199 MBH199 MBH
Efficiency (AFUE)95 %95 %
Turndown ratioup to 6.5:1up to 14:1
Weight (empty)88 lb179 lb
FuelNatural gas or propaneNatural gas or liquid propane
Domestic hot waterNot a combi; IBC documents direct connection of an indirect tankNot a combi; pair with an indirect tank

What actually separates them

Both boilers top out at 199 MBH input (58.3 kW published by each maker) and carry a 95% AFUE rating for heating-only service on natural gas or propane. That is where the similarity ends: IBC's VX 199 has the highest minimum input in its line at 30.6 MBH (8.8 kW), while the Viessmann B2HE-199 drops to 14 MBH (4.1 kW) and claims up to 14:1 turndown against the VX's published up-to-6.5:1.

That 16.6 MBH gap in low-fire ability decides a lot of real-world behavior in a large home or small multi-suite building whose design load is far below 199 MBH: the B2HE can hold part load without cycling through BC's mild shoulder seasons, while the VX 199 spends those hours near its low-fire floor or cycling on and off.

Physically the IBC is the lightest 199 MBH wall-hung boiler in this comparison at 88 lb (39.9 kg) with 1" NPT water connections, though its venting is 3" only to 100 equivalent feet per side and its operating rating is 30 psig. The B2HE-199 weighs 179 lb (81 kg) in the 39-inch cabinet with about 198 ft of venting quoted for the series. Both are heating-only, so hot water means an indirect tank, and both need a heat-loss calculation before sizing.

IBC Technologies

IBC VX 199

CurrentSold in Canada
Input
30.6–199 MBH
Output (max)
183.7 MBH
AFUE
95 %

The IBC VX 199 is the largest VX Series boiler: 30.6 to 199 MBH input, 95% AFUE, 3" venting only to 100 equivalent feet, rated at 30 psig, and the lightest way IBC offers a 199 MBH wall-hung input at 88 lb.

Natural gasPropaneHeating-only
CurrentSold in Canada
Input
14–199 MBH
Output (max)
—
AFUE
95 %

The Vitodens 200-W B2HE-199 is the largest model of Viessmann Canada's B2HE series: 14 to 199 MBH input at 95% AFUE, with the widest modulation range in the line and the flagship 7-inch touchscreen control.

Natural gasPropaneHeating-only

Frequently asked questions

Which 199 MBH boiler has the lower minimum fire?

The Viessmann B2HE-199 fires down to 14 MBH versus 30.6 MBH on the IBC VX 199, so the Viessmann handles low part loads without cycling far better.

How do their venting allowances compare?

The VX 199 is limited to 3" pipe at 100 equivalent feet per side with no 2" option, while Viessmann quotes about 198 ft of venting for the B2HE series, subject to the manual's pipe-material tables.

Not sure which one fits your home?

A consultation includes a heat-loss review so the size is right the first time.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 8, 2026. Last updated September 8, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate