Skip to content
Boilers.caby ROMA Heating & Cooling

Burnham · Alta

Burnham Alta Combi ALTAC-200

The Burnham Alta Combi ALTAC-200 is the flagship Alta: 20–150 MBH heating input with DHW input to 200 MBH, 5.2 GPM at a 70°F rise, 141 MBH heating capacity and a 123 MBH net AHRI rating at 95.0% AFUE.

CurrentCanadian status unknown

Key figures

Max input
150 MBH
Max CSA output
AFUE
95 %
Min input
20 MBH
Natural gasPropaneCombiresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Burnham Alta Combi ALTAC-200 in practice

The ALTAC-200 is the largest Alta and the only model whose printed numbers reach 200 MBH — on the DHW side (20.0–200 MBH DHW input). Its heating duty is 20–150 MBH input for 141 MBH heating capacity and a 123 MBH net AHRI water rating at 95.0% AFUE, per the official Alta Product Data Sheet ratings table (5/26 print). DHW rates print at 5.2 GPM for a 70°F rise and 4.7 GPM at 77°F.

As the top combi it carries the integrated DHW hydro block with flat plate heat exchanger, the included Alta FastPipe header (1-1/4" connections), a Grundfos UPS-78 Special circulator, and the OneTouch control — the product page calls the Alta combi 'the world's first 10:1, gas adaptive combi boiler' with '10:1 DHW turndown'. Boiler weight is 116 lb in the 20.4 in-deep chassis (the largest depth in the line).

No heating-only ALTA-200 exists in the official ratings table — the 200 designation belongs to the combi — so buyers needing a straight 200 MBH heat-only unit should look at the ALTA-180 ceiling or a commercial line. Sizing the shared heating/DHW input is licensed-contractor work.

All installation, gas, combustion and venting work belongs with a licensed contractor, sized from a heat-loss calculation. Canadian buyers should confirm supply and CSA/code compliance for the specific model before purchase, since usboiler.net prints no Canadian availability statement.

Best suited to

  • Larger homes and high-DHW-demand households wanting one wall-hung appliance
  • Projects whose DHW needs approach 5.2 GPM at a 70°F rise
  • Owners wanting the top Alta input (200 MBH DHW) with 95.0% AFUE and OneTouch commissioning

Applicability and support

Model number
ALTAC-200
Canadian availability
unknown
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Series terms

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Burnham. Units are shown with every value; notes flag conflicting sources or missing figures.

Burnham Alta Combi ALTAC-200 specifications
SpecificationValueNote
Input
Heating input, minimum20 MBHMinimum heating input per the Alta Product Data Sheet ratings table.
Heating input, maximum150 MBHMaximum heating input per the Alta Product Data Sheet ratings table.
DHW input, minimum20 MBHMinimum DHW input per the PDS ratings table.
DHW input, maximum200 MBHMaximum DHW input per the PDS ratings table.
Output
Heating capacity141 MBHHeating capacity per the Alta Product Data Sheet ratings table.
Net AHRI water rating123 MBHNet AHRI water ratings based on a piping and pickup allowance of 1.15, per the PDS ratings table.
Efficiency
Efficiency (AFUE)95 %95.0% AFUE printed for this model in the Alta Product Data Sheet ratings table.
Domestic hot water
DHW rate at 70°F rise5.2 GPMDHW rate at a 70°F temperature rise per the PDS ratings table.
DHW rate at 77°F rise4.7 GPMDHW rate at a 77°F temperature rise per the PDS ratings table.
Domestic hot waterCombi — integrated DHW hydro block with flat plate heat exchanger, boiler circulator and 3-way valveIntegrated hydro block system with quick-disconnect components; Alta FastPipe primary/secondary header included on combi models with 1-1/4" supply/return connections.
Venting and air
VentingDirect vent, sealed combustion — 2" universal vent connection (CPVC/PVC or polypropylene)2" universal vent connection and 2" air intake per the PDS; horizontal 2-pipe, vertical 2-pipe, concentric and hybrid configurations, plus a polypropylene chimney chase option.
Vent size2 inVent size column of the PDS ratings table prints 2 in for every Alta model.
Physical and connections
Boiler weight116 lbBoiler weight per the Alta Product Data Sheet ratings table.
Boiler depth20.4 inBoiler depth dimension 'A' per the PDS ratings and specifications table.
Gas connection1/2" NPT1/2" NPT gas connection as printed on the PDS connection figure.
Water connectionsAlta FastPipe header with 1-1/4" supply/return connectionsAltaFastPipe (primary/secondary header) included with Alta combi boilers, with a temperature/pressure gauge and 1-1/4" supply/return connections per the PDS.
Electrical
Electrical120 VAC connection board120 VAC connection board and separate low-voltage connection board per the PDS exploded view.
Operating limits and other
FuelNatural gas or propaneShips set for natural gas; two-step LP conversion at the gas valve switch and display — no kit purchase required, per the Alta Product Data Sheet.
ControlsOneTouch system — automatic combustion management, sensor-less rate-based reset, built-in self diagnostics, warm weather shutdownAutomatically sets combustion at start-up and continuously optimizes; outdoor-reset performance without an outdoor sensor. Not a Sage controller (verified in batch8 research).
Heat exchanger316L stainless steel heat exchanger, corrosion resistantWorld-leading 316L stainless steel per the PDS standard-equipment list; 12-year limited warranty per the product page.
Minimum gas supply pressure2.5 in. w.c. NG / 8.0 in. w.c. LPLow gas pressure capability as printed on the PDS standard-equipment list.
Maximum allowable working pressure (MAWP)50 psiSafety relief valve pressure, water: 30 PSI standard, ASME certified 'H'; maximum allowable working pressure 50 PSI, per the PDS.
Safety relief valve30 psi30 PSI standard per the PDS ratings and specifications notes.
Maximum allowable temperature setting210 °FMaximum allowable temperature setting 210°F; target setpoint 180°F; manual reset high limit setpoint 210°F, per the PDS.
Altitude rating10,100 ftAltitude capability to 10,100 ft on 'G00' suffix models (installed and set for altitude), per the PDS.
CirculatorGrundfos UPS-78 SpecialGrundfos UPS-78 Special circulator on combi models, per the PDS.

Frequently asked questions

What are the ALTAC-200's ratings?

95.0% AFUE; 20–150 MBH heating input; 141 MBH heating capacity; 123 MBH net AHRI; 20.0–200 MBH DHW input at 5.2 GPM (70°F rise) / 4.7 GPM (77°F rise), per the Alta Product Data Sheet.

Is there a heating-only ALTA-200?

No. The PDS ratings table prints no ALTA-200 heat-only model — only the ALTAC-200 combi; the top heating-only size is the ALTA-180.

How does the ALTAC-200 differ from the ALTAC-136B?

Heating input rises from 13.6–120 to 20–150 MBH, DHW input from 13.6–136 to 20.0–200 MBH, DHW rate from 3.7 to 5.2 GPM (70°F rise), and boiler weight from 95 to 116 lb in the deeper 20.4 in chassis.

Questions about the Burnham Alta Combi ALTAC-200?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate