Crown Raptor RPTR155CB (Combi)

The Raptor RPTR155CB is the combi version of the Raptor line: a stainless-steel, gas-fired, direct-vent condensing boiler rated 15.5–155 MBH input with 145 MBH DOE heating capacity and a 126 MBH net AHRI water rating (1.15 allowance) at 95% AFUE per the ratings table (I&O manual Table 2.3; product page). It is designed for installation on a wall with a pre-installed hanging bracket and wall-mount kit (literature PN 980778).

The specifications table lists 3 US gallons of water volume, a 30 psig maximum allowable working pressure, 1" copper sweat water connections, a 1/2" NPT gas connection and approximately 140 lb net weight. Venting is direct vent at 3" with a 30 ft minimum and a 60 ft (2") or 135 ft (3") maximum equivalent length; the boiler stands 33-5/16" high by 19-13/16" wide. The touchscreen Sola-family control includes outdoor reset, domestic hot water priority, three circulator outputs and a built-in sequencer for up to 8 boilers.

Note: the product page prints the combi rating row as RPTRC155CB with a 170 lb approximate shipping weight, while the I&O manual ratings table (Table 2.3) prints RPTR155CB at a 140 lb approximate net weight — the manual's model number and weight are used here, and the difference is flagged. Boilers.ca documents this model at model level; boilers ship set for natural gas with LP conversion by optional kit. No official Canadian-sales statement was found, so canadianStatus stays 'unknown'; installation, gas and venting work belongs with a licensed contractor.