Ideal Exalt Wall 110

The Exalt Wall 110 is the entry model of Ideal Heating North America's residential condensing line, firing from 13,750 to 110,000 BTU/h (8:1 turndown) at 95% AFUE with a DOE heating capacity of 102 MBH and an AHRI net rating of 89 MBH. Its low minimum input suits tight, well-insulated homes — the kind of load that dominates in mild coastal BC weather — while the stainless steel fire-tube heat exchanger and 8:1 modulation keep the burner in condensing range for long stretches.

It is a heating-only boiler, so domestic hot water comes from a separate source, typically an indirect tank; homes wanting one appliance for heat and hot water step to the Exalt Wall Combi 155 or 199. The cabinet measures 21.75 x 26 x 16.5 inches and weighs 88 lb, the lightest in the series, with 3/4-inch gas, 1-inch supply/return and 3-inch vent connections. Venting is flexible: 2-inch PVC, CPVC or polypropylene up to 28 equivalent feet, or 3-inch up to 100 feet through the 3-in-1 universal vent adapter.

The CTRLMax control provides plain-text diagnostics, outdoor reset, DHW priority and three configurable circulator outputs, and the boiler supports an integrated cascade of up to six Exalt solo units. The model ships in natural-gas (IDEX110S) and propane (IDEX110LP) versions, with published minimum inputs based on natural gas. No explicit Canadian sales statement was found on the official pages checked on 2026-09-09; the Exalt and Gallant submittals list ANSI Z21.13 and CSA 4.9 compliance, so Boilers.ca records canadianStatus as unknown.