Skip to content
Boilers.caby ROMA Heating & Cooling

Ideal Heating · Exalt Wall (heat-only)

Ideal Exalt Wall 199

The Ideal Exalt Wall 199 is the largest heat-only model in the Exalt Wall line: 24,875 to 199,000 BTU/h input at 95% AFUE, 8:1 turndown and a 119 lb cabinet with 3-inch venting up to 100 feet.

CurrentCanadian status unknown

Key figures

Max input
199 MBH
Max CSA output
—
AFUE
95 %
Min input
24.875 MBH
Natural gasPropaneHeating-onlyresidential

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Ideal Exalt Wall 199 in practice

The Exalt Wall 199 tops the heat-only Exalt Wall range at 199,000 BTU/h input, with a 24,875 BTU/h minimum, a DOE heating capacity of 184 MBH and an AHRI net rating of 159 MBH. It carries the same 95% AFUE rating and 8:1 turndown as the smaller models, making it the choice for larger detached homes or small multi-suite buildings that still want a wall-hung boiler.

The cabinet stays at 21.75 x 26 x 16.5 inches; weight rises to 119 lb and water volume to 4 gallons. Unlike the 110 and 155, the model table does not list a 2-inch vent option for the 199 — venting is 3-inch up to 100 equivalent feet. Connections are 3/4-inch gas and 1-inch supply/return. As a heat-only model it needs a separate DHW source, typically an indirect tank.

The CTRLMax control and integrated six-boiler cascade function carry over from the rest of the series, and the engineering submittal documents the model for specification work. Natural-gas (IDEX199S) and propane (IDEX199LP) versions are published with natural-gas input figures. No explicit Canadian sales statement was found on the official pages checked on 2026-09-09; the Exalt and Gallant submittals list ANSI Z21.13 and CSA 4.9 compliance, so Boilers.ca records canadianStatus as unknown.

Best suited to

  • Larger detached homes and small multi-suite buildings up to 199 MBH
  • Projects needing the full Exalt Wall input range in the same compact cabinet
  • Homes with a substantial indirect-tank recovery load

Applicability and support

Model number
IDEX199S (NG) / IDEX199LP (LP)
Canadian availability
unknown
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Series terms

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Ideal Heating. Units are shown with every value; notes flag conflicting sources or missing figures.

Ideal Exalt Wall 199 specifications
SpecificationValueNote
Input
Input, minimum (NG & LP)24.875 MBH24,875 BTU/h per the official model table
Input, maximum (NG & LP)199 MBH199,000 BTU/h per the official model table
Output
DOE heating capacity184 MBHPer the official model table.
AHRI net rating159 MBHPer the official model table.
Efficiency
Efficiency (AFUE)95 %95% AFUE per the official model table.
Domestic hot water
Domestic hot waterHeating-only; pair with a separate DHW source
Venting and air
Vent / air connections3 in
Maximum vent length, 3 in100 ftPer the official model table.
Physical and connections
Weight119 lb
Width21.75 in
Height26 in
Depth16.5 in
Operating limits and other
Turndown ratio8:1Per the official model table.
Gas connection (MNPT)3/4 in
Supply / return connections (MNPT)1 in
Water volume4 galPer the official model table.
Maximum CH flow temperature185 °F185°F (85°C) per the official model table.

Frequently asked questions

What is the firing range of the Exalt Wall 199?

24,875 to 199,000 BTU/h at 95% AFUE with an 8:1 turndown, a 184 MBH DOE heating capacity and a 159 MBH AHRI net rating.

Does the Exalt Wall 199 support 2-inch venting?

No. The official model table lists only 3-inch venting for the 199, up to 100 equivalent feet; the 2-inch option appears on the 110 and 155 rows only.

Is the Exalt Wall 199 the same size as the 110?

The cabinet is the same 21.75 x 26 x 16.5 inches, but the 199 weighs 119 lb against the 110's 88 lb and holds 4 gallons against 2.

Questions about the Ideal Exalt Wall 199?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate