Viessmann Vitodens 200-W F.92 — Function of Relevant Electronics Module in Emergency Mode
F.92
Function of relevant electronics module in emergency mode. There is a communication error with the ADIO electronics module, so check the commissioning setting, the connections and leads to the ADIO module, the PlusBus voltage of 24 to 28 V and the rotary switch S1 subscriber number.
Applies to
This communication or network fault code is displayed by the HMU/HMI-BCU control (7" touchscreen) on Vitodens 200-W B2HE models (B2HE-85, B2HE-120, B2HE-150, B2HE-199), as documented in Service Instructions — Vitodens 200-W B2HE, doc 6167 813 - 23, troubleshooting fault messages (6167 813 - 23). Codes can differ between controller generations, so always check the manual that matches your unit.
- Viessmann Vitodens 200-W (B2HE)
- Viessmann Vitodens 200-W B2HE-85
- Viessmann Vitodens 200-W B2HE-120
- Viessmann Vitodens 200-W B2HE-150
- Viessmann Vitodens 200-W B2HE-199
Controller: HMU/HMI-BCU control (7" touchscreen). Source manual: 6167 813 - 23 (2026-02).
Why a code is not a diagnosis
A communication code involves the link between controls (cascade, remote, sensors on a bus). Another unit being off, a wiring fault or an address conflict can all produce it.
Safe things to observe
- Check that every appliance in a multi-unit plant has power.
- Report the code together with any other codes on the system.
Do not
- Do not re-address or rewire control networks yourself.
How professional service helps
- A technician verifies power, wiring and settings across the connected units.
- Combustion and safety devices are verified with an analyser and the manufacturer's procedure after any repair.
Where ROMA provides on-site service
On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.
Frequently asked questions
Can I clear this code myself?
Clearing a code without fixing its cause usually just brings it back. Note the code, check the safe items on this page, then call a licensed technician. If your appliance manual describes a user reset for this exact code and it stays away, no call may be needed.
Boiler locked out? Call with the alert text ready.
The brand, model and this alert are passed along when you request service online, so the technician arrives prepared.
On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.
Sources and verification
- Service Instructions — Vitodens 200-W B2HE, doc 6167 813 - 23, troubleshooting fault messages · 6167 813 - 23 · accessed September 7, 2026
Facts checked September 7, 2026. Last updated September 7, 2026. Technical reviewer: not yet assigned.