Skip to content
Boilers.caby ROMA Heating & Cooling

Viessmann · Vitocrossal 200 (CM2, GW6B)

Viessmann Vitocrossal 200 CM2-246

The Vitocrossal 200 CM2-246 is the mid-size model of the small CM2 (GW6B) chassis: 175 to 878 MBH natural-gas input (51 to 257 kW) at 95% combustion efficiency and 5:1 turndown, weighing 759 lb (344 kg).

CurrentSold in Canada

Key figures

Max input
878 MBH
Max CSA output
—
AFUE
—
Min input
175 MBH
Natural gasPropaneHeating-onlycommercial

Input is gas energy consumed; output is heat delivered. Never size from input alone.

Viessmann Vitocrossal 200 CM2-246 in practice

The CM2-246 sits between the CM2-186 and CM2-311 in the Vitocrossal 200 CM2 range. Its natural-gas input prints from 175,000 to 878,000 BTU (51 to 257 kW), with a higher minimum fire than the CM2-186's 131,000 BTU floor.

At 759 lb (344 kg) it is 33 lb heavier than the CM2-186 while remaining in the same small-chassis footprint documented by the 186–311 service instructions (doc 5584 109 - 16, 05/2021). It prints the same 95% combustion efficiency and 5:1 turndown as the other small models.

Shared CM2 features apply: Inox-Crossal stainless steel heat exchanger, pre-mix cylinder burner, natural gas or propane with simple electronic conversion, Vitotronic 300 GW6B control with cascade control of up to eight boilers, common venting of up to four boilers, and no dedicated boiler pump required.

Best suited to

  • Plants whose design load sits between the CM2-186 and CM2-311 sizes
  • Loads wanting more top-end input than the 186 without leaving the small chassis
  • Commercial cascade plants mixing CM2 sizes for staged capacity

Applicability and support

Model number
CM2-246
Canadian availability
available
Production status
current
ROMA supplies
Confirmed at consultation
ROMA services
Confirmed at consultation
Warranty
Not verified

Where ROMA provides on-site service

On-site service is currently offered in Greater Vancouver, BC, including Vancouver, Burnaby, Richmond, Surrey, Coquitlam, North Vancouver, West Vancouver, New Westminster, Port Coquitlam, Port Moody, Delta, Langley, Maple Ridge, Abbotsford, Chilliwack, White Rock, Pitt Meadows, Tsawwassen, Anmore, Lions Bay, Belcarra, Bowen Island, Mission. Everything else on this site is reference information you can use anywhere in Canada.

See all service areas

Specifications

Published specifications

Values as published by Viessmann. Units are shown with every value; notes flag conflicting sources or missing figures.

Viessmann Vitocrossal 200 CM2-246 specifications
SpecificationValueNote
Input
Input, minimum (natural gas)175 MBH175,000 BTU (51 kW), per the product page
Input, maximum (natural gas)878 MBH878,000 BTU (257 kW), per the product page
Efficiency
Combustion efficiency95 %Per the product-page efficiency row.
Physical and connections
Weight759 lb344 kg
Operating limits and other
Turndown ratio5:1Per the product page.

Frequently asked questions

How does the CM2-246 differ from the CM2-186?

Maximum natural-gas input rises from 663,000 to 878,000 BTU (194 to 257 kW) and the minimum fire rises from 131,000 to 175,000 BTU (38.5 to 51 kW). Weight steps from 726 to 759 lb; both print 95% combustion efficiency.

What efficiency does the CM2-246 print?

95% combustion efficiency per the product-page efficiency row, as printed for all three small CM2 models.

Does the CM2-246 run on propane?

Yes. The page lists natural gas or liquid propane with simple electronic conversion; the printed input range is the natural-gas figure.

Questions about the Viessmann Vitocrossal 200 CM2-246?

Describe what the boiler is doing and get a straight answer about the next step.

On-site service in Greater Vancouver, BC. ROMA lists “Open 7 days” on its site; call to confirm same-day availability.

Sources and verification

Facts checked September 9, 2026. Last updated September 9, 2026. Technical reviewer: not yet assigned.

CallEmailEstimate